Hi Rob, On Tue, Jun 14, 2016 at 05:05:17PM -0500, Rob Herring wrote: > On Sat, Jun 11, 2016 at 06:39:53PM +0300, Ivaylo Dimitrov wrote: > > Add DT bindings description > > Not exactly the best commit msg. > > > > > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com> > > --- > > .../bindings/media/i2c/toshiba,et8ek8.txt | 50 > > ++++++++++++++++++++++ > > 1 file changed, 50 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt > > b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt > > new file mode 100644 > > index 0000000..997d268 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt > > @@ -0,0 +1,50 @@ > > +Toshiba et8ek8 5MP sensor > > + > > +Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device > > + > > +More detailed documentation can be found in > > +Documentation/devicetree/bindings/media/video-interfaces.txt . > > + > > + > > +Mandatory properties > > +-------------------- > > + > > +- compatible: "toshiba,et8ek8" > > +- reg: I2C address (0x3e, or an alternative address) > > +- vana-supply: Analogue voltage supply (VANA), 2.8 volts > > > +- clocks: External clock to the sensor > > +- clock-frequency: Frequency of the external clock to the sensor > > These should be mutually-exclusive. If you have a clock, then you can > get the frequency at runtime.
Yes, you can. But the intention is to set the frequency: the sensor requires a particular, pre-determined frequency. Typically this is specific to the board. -- Kind regards, Sakari Ailus e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
