++ 07/11/00 00:43 -0800 - Miles Lane:
> Hi,
>
> I have an ORB drive I am accessing using the usb-storage driver.
> I formatted the drive media last night using Windoze 98. The media
> was formatted as though it had one large partition, which is weird
> because I had previously partitioned the drive under Linux 2.4.0-test10
> with several partitions. The Windoze format utility did not notice
> those partitions and simply (I thought) wrote one large partition and
> formatted it as VFAT. I have successfully written and read data on
> the media using two separate Windoze 98 machines. When I mounted
> the drive under 2.4.0-test10 and then looked at the media with
> fdisk, here's what I see:
>
> #> fdisk /dev/sda
>
> Disk /dev/sda: 68 heads, 62 sectors, 1021 cylinders
> Units = cylinders of 4216 * 512 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 ? 455397 584533 272218546+ 20 Unknown
> Partition 1 has different physical/logical beginnings (non-Linux?):
> phys=(356, 97, 46) logical=(455396, 22, 59)
> Partition 1 has different physical/logical endings:
> phys=(357, 116, 40) logical=(584532, 18, 23)
> Partition 1 does not end on cylinder boundary:
> phys=(357, 116, 40) should be (357, 67, 62)
> /dev/sda2 ? 315509 443350 269488144 6b Unknown
> Partition 2 has different physical/logical beginnings (non-Linux?):
> phys=(288, 110, 57) logical=(315508, 39, 57)
> Partition 2 has different physical/logical endings:
> phys=(269, 101, 57) logical=(443349, 17, 52)
> Partition 2 does not end on cylinder boundary:
> phys=(269, 101, 57) should be (269, 67, 62)
> /dev/sda3 ? 127844 459524 699181456 53 OnTrack DM6 Aux3
> Partition 3 has different physical/logical beginnings (non-Linux?):
> phys=(345, 32, 19) logical=(127843, 53, 18)
> Partition 3 has different physical/logical endings:
> phys=(324, 77, 19) logical=(459523, 53, 49)
> Partition 3 does not end on cylinder boundary:
> phys=(324, 77, 19) should be (324, 67, 62)
> /dev/sda4 * 330795 330800 10668+ 49 Unknown
> Partition 4 has different physical/logical beginnings (non-Linux?):
> phys=(87, 1, 0) logical=(330794, 2, 36)
> Partition 4 has different physical/logical endings:
> phys=(335, 78, 2) logical=(330799, 6, 44)
> Partition 4 does not end on cylinder boundary:
> phys=(335, 78, 2) should be (335, 67, 62)
>
> Partition table entries are not in disk order
>
>
> When I try to mount the drive, I get the common error:
>
> mount -t vfat /dev/sda1 /mnt/orb1
> mount: wrong fs type, bad option, bad superblock on /dev/sda1,
> or too many mounted file systems
>
> What's going on here? It seems to me that this is a bug in the
> Linux test10 filesystem support, since Windoze can read and write
> to this drive currently. Our implementation should be compatible.
>
> Cheers,
> Miles
>
It would seem, to me, that if the partitions exist, but are conflicted,
yet windows sees them as a single drive; then windows is misbehaving,
and probably horked your partitions.
--
"I may be a monkey, Crutcher Dunnavant
but I'm a monkey <[EMAIL PROTECTED]>
with ambition!" Red Hat OS Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
