On 06/17/2016 07:00 AM, Chris Lapa wrote:
From: Chris Lapa <ch...@lapa.com.au>
Adds support for device tree to setup a max8903 battery charger. DC and USB
validity are determined by looking the presence of the dok and uok gpios.
Signed-off-by: Chris Lapa <ch...@lapa.com.au>
---
drivers/power/max8903_charger.c | 217 +++++++++++++++++++++++++++-------------
1 file changed, 145 insertions(+), 72 deletions(-)
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 5ddc667..3c59213 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/power_supply.h>
#include <linux/platform_device.h>
@@ -75,6 +78,7 @@ static int max8903_get_property(struct power_supply *psy,
default:
return -EINVAL;
}
+
return 0;
}
@@ -179,48 +183,116 @@ static irqreturn_t max8903_fault(int irq, void *_data)
return IRQ_HANDLED;
}
+static struct max8903_pdata *max8903_parse_dt_data(
+ struct device *dev)
+{
+ struct device_node *of_node = dev->of_node;
Common naming convention for device_node is just 'np':
struct device_node *np = dev->of_node;
It is shorter and already spread in the kernel.
+ struct max8903_pdata *pdata = NULL;
+
+ if (!of_node)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata),
+ GFP_KERNEL);
No need to break the line.
+ if (!pdata)
+ return NULL;
+
+ pdata->dc_valid = false;
+ pdata->usb_valid = false;
+
+ pdata->cen = of_get_named_gpio(of_node, "cen-gpios", 0);
+ if (!gpio_is_valid(pdata->cen))
+ pdata->cen = -EINVAL;
+
+ pdata->chg = of_get_named_gpio(of_node, "chg-gpios", 0);
+ if (!gpio_is_valid(pdata->chg))
+ pdata->chg = -EINVAL;
+
+ pdata->flt = of_get_named_gpio(of_node, "flt-gpios", 0);
+ if (!gpio_is_valid(pdata->flt))
+ pdata->flt = -EINVAL;
+
+ pdata->usus = of_get_named_gpio(of_node, "usus-gpios", 0);
+ if (!gpio_is_valid(pdata->usus))
+ pdata->usus = -EINVAL;
+
+ pdata->dcm = of_get_named_gpio(of_node, "dcm-gpios", 0);
+ if (!gpio_is_valid(pdata->dcm))
+ pdata->dcm = -EINVAL;
+
+ pdata->dok = of_get_named_gpio(of_node, "dok-gpios", 0);
+ if (!gpio_is_valid(pdata->dok))
+ pdata->dok = -EINVAL;
+ else
+ pdata->dc_valid = true;
+
+ pdata->uok = of_get_named_gpio(of_node, "uok-gpios", 0);
+ if (!gpio_is_valid(pdata->uok))
+ pdata->uok = -EINVAL;
+ else
+ pdata->usb_valid = true;
+
+ return pdata;
+}
+
static int max8903_probe(struct platform_device *pdev)
{
- struct max8903_data *data;
+ struct max8903_data *charger;
struct device *dev = &pdev->dev;
- struct max8903_pdata *pdata = pdev->dev.platform_data;
struct power_supply_config psy_cfg = {};
int ret = 0;
int gpio;
int ta_in = 0;
int usb_in = 0;
- if (pdata == NULL) {
+ charger = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->pdata = pdev->dev.platform_data;
+ if (IS_ENABLED(CONFIG_OF) && !charger->pdata && dev->of_node)
+ charger->pdata = max8903_parse_dt_data(dev);
+
+ if (!charger->pdata) {
dev_err(dev, "No platform data.\n");
return -EINVAL;
}
- data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
+ charger->dev = dev;
- data->pdata = pdev->dev.platform_data;
- data->dev = dev;
- platform_set_drvdata(pdev, data);
+ charger->fault = false;
+ charger->ta_in = ta_in;
+ charger->usb_in = usb_in;
- if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ charger->psy_desc.name = "max8903_charger";
+ charger->psy_desc.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ charger->psy_desc.get_property = max8903_get_property;
+ charger->psy_desc.properties = max8903_charger_props;
+ charger->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ platform_set_drvdata(pdev, charger);
+
+ if (charger->pdata->dc_valid == false && charger->pdata->usb_valid ==
false) {
dev_err(dev, "No valid power sources.\n");
return -EINVAL;
}
- if (pdata->dc_valid) {
- if (gpio_is_valid(pdata->dok)) {
+
+ if (charger->pdata->dc_valid) {
+ if (gpio_is_valid(charger->pdata->dok)) {
ret = devm_gpio_request(dev,
- pdata->dok,
- data->psy_desc.name);
+ charger->pdata->dok,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for dok: %d err
%d\n",
- pdata->dok, ret);
+ charger->pdata->dok, ret);
I pointed the weird indentation in 4/7. Just a reminder: after fixing it
in 4/7 you also have to adjust it in consecutive patches.
Best regards,
Krzysztof
