On Wed 22 Jun 01:34 PDT 2016, Neil Armstrong wrote:
> On 06/22/2016 07:23 AM, Bjorn Andersson wrote:
> > On Fri 17 Jun 03:22 PDT 2016, Neil Armstrong wrote:
> >
> > [..]
> >> diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c
> > [..]
> >> +
> >> +static const struct qcom_rpm_data mdm9615_template = {
> >> + .version = 3,
> >> + .resource_table = mdm9615_rpm_resource_table,
> >> + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table),
> >> +};
> >
> > Please see:
> > https://patchwork.kernel.org/patch/9177159/
> >
> > You should set the new .sel_size to 4 here, please either rebase ontop
> > of Linus patch or send an update after both are merged.
> >
> >> +
> >> static const struct of_device_id qcom_rpm_of_match[] = {
> >> { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template },
> >> { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template },
> >> { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template },
> >> { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template },
> >> + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template },
> >> { }
> >> };
> >> MODULE_DEVICE_TABLE(of, qcom_rpm_of_match);
> >> diff --git a/include/dt-bindings/mfd/qcom-rpm.h
> >> b/include/dt-bindings/mfd/qcom-rpm.h
> >> index 13a9d4b..db85912 100644
> >> --- a/include/dt-bindings/mfd/qcom-rpm.h
> >> +++ b/include/dt-bindings/mfd/qcom-rpm.h
> >> @@ -148,6 +148,29 @@
> >> #define QCOM_RPM_SMB208_S2a 138
> >> #define QCOM_RPM_SMB208_S2b 139
> >>
> >> +#define QCOM_RPM_PM8018_SMPS1 200
> >
> > These numbers are a logical identifier and as such you shouldn't skip
> > 140-199.
> >
> >> +#define QCOM_RPM_PM8018_SMPS2 201
> >> +#define QCOM_RPM_PM8018_SMPS3 202
> >> +#define QCOM_RPM_PM8018_SMPS4 203
> >> +#define QCOM_RPM_PM8018_SMPS5 204
> >> +#define QCOM_RPM_PM8018_LDO1 205
> >> +#define QCOM_RPM_PM8018_LDO2 206
> >> +#define QCOM_RPM_PM8018_LDO3 207
> >> +#define QCOM_RPM_PM8018_LDO4 208
> >> +#define QCOM_RPM_PM8018_LDO5 209
> >> +#define QCOM_RPM_PM8018_LDO6 210
> >> +#define QCOM_RPM_PM8018_LDO7 211
> >> +#define QCOM_RPM_PM8018_LDO8 212
> >> +#define QCOM_RPM_PM8018_LDO9 213
> >> +#define QCOM_RPM_PM8018_LDO10 214
> >> +#define QCOM_RPM_PM8018_LDO11 215
> >> +#define QCOM_RPM_PM8018_LDO12 216
> >> +#define QCOM_RPM_PM8018_LDO13 217
> >> +#define QCOM_RPM_PM8018_LDO14 218
> >> +#define QCOM_RPM_PM8018_LVS1 219
> >> +#define QCOM_RPM_NCP 220
> >
> > We already have PM8921_NCP and PM8058_NCP, so better make this
> > QCOM_RPM_PM8018_NCP for consistency.
> >
> >> +#define QCOM_RPM_VOLTAGE_CORNER 221
> >> +
> >
> > Other then these details
> > Acked-by: Bjorn Andersson <bjorn.anders...@linaro.org>
> >
> > Regards,
> > Bjorn
> >
> Thanks,
>
> I rebased on Linus two patches ("fix offset error for msm8660" and
> "parametrize also ack selector size")
>
> I suppose I should also drop the QCOM_RPM_VOLTAGE_CORNER rpm entry also ?
The open question is how we expose the corner to client drivers, but
it's still part of the rpm protocol. So please leave it here.
Regards,
Bjorn
