From: Ondrej Jirman <meg...@megous.com>
This patch adds the binding documentation for the
sun8i_ths driver. This is a driver for thermal sensor
found in Allwinner H3 SoC.
Signed-off-by: Ondřej Jirman <meg...@megous.com>
---
.../devicetree/bindings/thermal/sun8i-ths.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
new file mode 100644
index 0000000..76859d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
@@ -0,0 +1,26 @@
+* Thermal sensor driver for Allwinner H3 SoC
+
+Required properties:
+- compatible : "allwinner,sun8i-h3-ths"
+- reg : Address range of the thermal sensor registers and of the calibration
+ data
+- resets : Must contain phandles to reset controls matching the entries
+ of the names
+- reset-names : Must include the name "ahb"
+- clocks : Must contain phandles to clock controls matching the entries
+ of the names
+- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS
+ clock
+
+Example:
+ths: ths@01c25000 {
+ #thermal-sensor-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>,
+ <0x01c14234 0x4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bus_rst 136>;
+ reset-names = "ahb";
+ clocks = <&bus_gates 72>, <&ths_clk>;
+ clock-names = "ahb", "ths";
+};
--
2.9.0
