On Sun, Jun 26, 2016 at 12:28:35AM -0700, Stephen Boyd wrote:
> The MSM chipidea wrapper has two bits that are used to reset the
> first or second phy. Add support for these bits via the reset
> controller framework, so that phy drivers can reset their
> hardware at the right time during initialization.
>
> Cc: Peter Chen <peter.c...@nxp.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.b...@linaro.org>
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 43
> +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c
> b/drivers/usb/chipidea/ci_hdrc_msm.c
> index fb4340f02c16..7d191928e55b 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -14,14 +14,17 @@
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> #include <linux/io.h>
> +#include <linux/reset-controller.h>
> #include <linux/extcon.h>
> #include <linux/of.h>
>
> #include "ci.h"
>
> #define HS_PHY_AHB_MODE 0x0098
> +#define HS_PHY_CTRL 0x0240
> #define HS_PHY_SEC_CTRL 0x0278
> # define HS_PHY_DIG_CLAMP_N BIT(16)
> +# define HS_PHY_POR_ASSERT BIT(0)
>
> #define HS_PHY_GENCONFIG 0x009c
> # define HS_PHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
> @@ -38,11 +41,38 @@ struct ci_hdrc_msm {
> struct clk *iface_clk;
> struct extcon_dev *vbus_edev;
> struct ci_hdrc_platform_data pdata;
> + struct reset_controller_dev rcdev;
> bool secondary_phy;
> bool hsic;
> void __iomem *base;
> };
>
> +static int
> +ci_hdrc_msm_por_reset(struct reset_controller_dev *r, unsigned long id)
> +{
> + struct ci_hdrc_msm *ci_msm = container_of(r, struct ci_hdrc_msm, rcdev);
> + void __iomem *addr = ci_msm->base;
Like I mentioned at previous email, you can use vendor base for
0x200.
> + u32 val;
> +
> + if (id)
> + addr += HS_PHY_SEC_CTRL;
> + else
> + addr += HS_PHY_CTRL;
> +
> + val = readl_relaxed(addr);
> + val |= HS_PHY_POR_ASSERT;
> + writel_relaxed(val, addr);
> + udelay(12);
> + val &= ~HS_PHY_POR_ASSERT;
> + writel(val, addr);
> +
> + return 0;
> +}
> +
> +static const struct reset_control_ops ci_hdrc_msm_reset_ops = {
> + .reset = ci_hdrc_msm_por_reset,
> +};
> +
> static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> {
> struct device *dev = ci->dev->parent;
> @@ -176,13 +206,21 @@ static int ci_hdrc_msm_probe(struct platform_device
> *pdev)
> ci->vbus_edev = NULL;
> }
>
> + ci->rcdev.owner = THIS_MODULE;
> + ci->rcdev.ops = &ci_hdrc_msm_reset_ops;
> + ci->rcdev.of_node = pdev->dev.of_node;
> + ci->rcdev.nr_resets = 2;
> + ret = reset_controller_register(&ci->rcdev);
> + if (ret)
> + return ret;
> +
> reset_control_assert(reset);
> usleep_range(10000, 12000);
> reset_control_deassert(reset);
>
> ret = clk_prepare_enable(ci->core_clk);
> if (ret)
> - return ret;
> + goto err_core;
>
> ret = clk_prepare_enable(ci->iface_clk);
> if (ret)
> @@ -220,6 +258,8 @@ err_mux:
> clk_disable_unprepare(ci->iface_clk);
> err_iface:
> clk_disable_unprepare(ci->core_clk);
> +err_core:
> + reset_controller_unregister(&ci->rcdev);
> return ret;
> }
>
> @@ -232,6 +272,7 @@ static int ci_hdrc_msm_remove(struct platform_device
> *pdev)
> ci_hdrc_remove_device(ci->ci);
> clk_disable_unprepare(ci->iface_clk);
> clk_disable_unprepare(ci->core_clk);
> + reset_controller_unregister(&ci->rcdev);
>
> return 0;
> }
> --
> 2.9.0.rc2.8.ga28705d
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
