On 2/6/07, Manu Abraham <[EMAIL PROTECTED]> wrote:
On 2/6/07, Manu Abraham <[EMAIL PROTECTED]> wrote:
> On 2/6/07, Luming Yu <[EMAIL PROTECTED]> wrote:
> > > dang !
> > >
> > > rebooted it into 2.6.17.7
> > >
> > > no errors, during a bootup, BIST isn't running anymore
> > > running M$ did change the status from dead to alive ??? shocked !!
> >
> > Interesting! does windows driver fixes the broken firmware/flash on this
card?
>
>
> No firmware/flash on the card.
>
>
> >
> > >
> > > attached lspci output in the very same setup as earlier, no difference
> > > in anything, except that it was rebooted into windows.
> > >
> > > the PCI config dump would help ?
> > >
> >
> > I guess you would never reproduce this issue again unless you can
> > restore the broken firmware/flash on this card. :-)
> >
>
> none on the card, a flash or a firmware .. it has a 24c02 EEPROM for
> vendor information, that's all
>
You can see the same from this picture
http://abraham.manu.googlepages.com/p3130016.jpg
regards,
manu
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
