With this change, JC-42.4 compatible temperature sensors can be configured
in devicetree by providing a generic "jedec,jc-42.4-temp" binding.
Signed-off-by: Guenter Roeck <li...@roeck-us.net>
---
drivers/hwmon/jc42.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 9887d3224a86..374630bab137 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -31,6 +31,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/of.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
@@ -537,11 +538,20 @@ static const struct i2c_device_id jc42_id[] = {
};
MODULE_DEVICE_TABLE(i2c, jc42_id);
+#ifdef CONFIG_OF
+static const struct of_device_id jc42_of_ids[] = {
+ { .compatible = "jedec,jc-42.4-temp", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, jc42_of_ids);
+#endif
+
static struct i2c_driver jc42_driver = {
.class = I2C_CLASS_SPD,
.driver = {
.name = "jc42",
.pm = JC42_DEV_PM_OPS,
+ .of_match_table = of_match_ptr(jc42_of_ids),
},
.probe = jc42_probe,
.remove = jc42_remove,
--
2.5.0
