On Sat, Jul 09, 2016 at 10:00:54AM +0530, Rajesh Bhagat wrote:
> Adds qoriq usb 2.0 phy driver support for LS1021A and LS1012A
> platform.
>
> Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
> ---
> Changes in v2:
> - Replaced Freescale with QorIQ in comments section
> - Changed the compatible string to fsl,qoriq-usb2-phy and added version
> - Added dependency on ARCH_MXC/ARCH_LAYERSCAPE and OF in Kconfig
> - Dropped CONFIG_ULPI #ifdefs to make code generic
> - Removed calls to devm free/release calls
>
> drivers/phy/Kconfig | 8 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-qoriq-usb2.c | 228
> +++++++++++++++++++++++++++++++++++++++++++
> drivers/phy/phy-qoriq-usb2.h | 50 ++++++++++
> 4 files changed, 287 insertions(+)
> create mode 100644 drivers/phy/phy-qoriq-usb2.c
> create mode 100644 drivers/phy/phy-qoriq-usb2.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index b869b98..cc69299 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -434,4 +434,12 @@ config PHY_CYGNUS_PCIE
>
> source "drivers/phy/tegra/Kconfig"
>
> +config PHY_QORIQ_USB2
> + tristate "QorIQ USB 2.0 PHY driver"
> + depends on ARCH_MXC || ARCH_LAYERSCAPE
It seems mxc platforms do not use this PHY.
Besides, if you are using ULPI phy, you need
to depend on ULPI bus.
Peter
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the USB2.0 PHY on the QorIQ SoC.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 9c3e73c..044105a 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -53,5 +53,6 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +obj-$(CONFIG_PHY_QORIQ_USB2) += phy-qoriq-usb2.o
>
> obj-$(CONFIG_ARCH_TEGRA) += tegra/
> diff --git a/drivers/phy/phy-qoriq-usb2.c b/drivers/phy/phy-qoriq-usb2.c
> new file mode 100644
> index 0000000..f74d255
> --- /dev/null
> +++ b/drivers/phy/phy-qoriq-usb2.c
> @@ -0,0 +1,228 @@
> +/*
> + * QorIQ SoC USB 2.0 PHY driver
> + *
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + * Author: Rajesh Bhagat <rajesh.bha...@nxp.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/usb/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/usb/phy.h>
> +#include <linux/usb/ulpi.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#include "phy-qoriq-usb2.h"
> +
> +static int qoriq_usb2_phy_init(struct phy *_phy)
> +{
> + struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
> + struct device *dev = ctx->dev;
> +
> + if (ctx->ulpi_phy) {
> + if (usb_phy_init(ctx->ulpi_phy)) {
> + dev_err(dev, "unable to init transceiver, probably
> missing\n");
> + return -ENODEV;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qoriq_usb2_phy_power_on(struct phy *_phy)
> +{
> + struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
> + u32 flags;
> +
> + if (ctx->ulpi_phy) {
> + flags = usb_phy_io_read(ctx->ulpi_phy, ULPI_OTG_CTRL);
> + usb_phy_io_write(ctx->ulpi_phy, flags |
> + (ULPI_OTG_CTRL_DRVVBUS_EXT |
> + ULPI_OTG_CTRL_EXTVBUSIND), ULPI_OTG_CTRL);
> + flags = usb_phy_io_read(ctx->ulpi_phy, ULPI_IFC_CTRL);
> + usb_phy_io_write(ctx->ulpi_phy, flags |
> + (ULPI_IFC_CTRL_EXTERNAL_VBUS |
> + ULPI_IFC_CTRL_PASSTHRU), ULPI_IFC_CTRL);
> + }
> +
> + return 0;
> +}
> +
> +static int qoriq_usb2_phy_power_off(struct phy *_phy)
> +{
> + /* TODO: Add logic to power off phy */
> +
> + return 0;
> +}
> +
> +static int qoriq_usb2_phy_exit(struct phy *_phy)
> +{
> + struct qoriq_usb2_phy_ctx *ctx = phy_get_drvdata(_phy);
> +
> + if (ctx->ulpi_phy)
> + usb_phy_shutdown(ctx->ulpi_phy);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops ops = {
> + .init = qoriq_usb2_phy_init,
> + .power_on = qoriq_usb2_phy_power_on,
> + .power_off = qoriq_usb2_phy_power_off,
> + .exit = qoriq_usb2_phy_exit,
> + .owner = THIS_MODULE,
> +};
> +
> +
> +static enum qoriq_usb2_phy_ver of_usb_get_phy_version(struct device_node *np)
> +{
> + enum qoriq_usb2_phy_ver phy_version = QORIQ_PHY_UNKNOWN;
> +
> + if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy")) {
> + if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy-v1.0"))
> + phy_version = QORIQ_PHY_LEGACY;
> + else if (of_device_is_compatible(np, "fsl,qoriq-usb2-phy-v2.0"))
> + phy_version = QORIQ_PHY_NXP_ISP1508;
> + }
> + return phy_version;
> +}
> +
> +static int qoriq_usb2_phy_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct resource *res;
> + struct qoriq_usb2_phy_ctx *ctx;
> + struct device *dev = &pdev->dev;
> + const struct of_device_id *of_id;
> + struct phy_provider *phy_provider;
> + struct device_node *np = pdev->dev.of_node;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->dev = dev;
> +
> + of_id = of_match_device(dev->driver->of_match_table, dev);
> + if (!of_id) {
> + dev_err(dev, "failed to get device match\n");
> + ret = -EINVAL;
> + goto err_out;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev, "failed to get I/O memory\n");
> + ret = -ENOENT;
> + goto err_out;
> + }
> +
> + ctx->regs = devm_ioremap(dev, res->start, resource_size(res));
> + if (!ctx->regs) {
> + dev_err(dev, "failed to remap I/O memory\n");
> + ret = -ENOMEM;
> + goto err_out;
> + }
> +
> + platform_set_drvdata(pdev, ctx);
> +
> + ctx->phy = devm_phy_create(ctx->dev, NULL, &ops);
> + if (IS_ERR(ctx->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + ret = PTR_ERR(ctx->phy);
> + goto err_out;
> + }
> + phy_set_drvdata(ctx->phy, ctx);
> +
> + ctx->phy_version = of_usb_get_phy_version(np);
> + if (ctx->phy_version == QORIQ_PHY_UNKNOWN) {
> + ret = -EINVAL;
> + dev_err(dev, "failed to get PHY version\n");
> + goto err_out;
> + }
> +
> + ctx->phy_type = of_usb_get_phy_mode(np);
> + switch (ctx->phy_type) {
> + case USBPHY_INTERFACE_MODE_ULPI:
> + switch (ctx->phy_version) {
> + case QORIQ_PHY_NXP_ISP1508:
> + ctx->ulpi_phy = qoriq_otg_ulpi_create(0);
> + if (!ctx->ulpi_phy) {
> + dev_err(dev, "qoriq_otg_ulpi_create returned
> NULL\n");
> + ret = -ENOMEM;
> + goto err_out;
> + }
> + ctx->ulpi_phy->io_priv = ctx->regs + ULPI_VIEWPORT;
> + break;
> + default:
> + ctx->ulpi_phy = NULL;
> + break;
> + }
> + break;
> + default:
> + dev_err(&pdev->dev, "phy_type %d is invalid or unsupported\n",
> + ctx->phy_type);
> + ret = -EINVAL;
> + goto err_out;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "failed to register phy_provider\n");
> + ret = PTR_ERR_OR_ZERO(phy_provider);
> + goto err_out;
> + }
> +
> + dev_dbg(dev, "initialized\n");
> + return 0;
> +
> +err_out:
> + return ret;
> +}
> +
> +static int qoriq_usb2_phy_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct qoriq_usb2_phy_ctx *ctx = platform_get_drvdata(pdev);
> +
> + devm_phy_destroy(ctx->dev, ctx->phy);
> + devm_iounmap(dev, ctx->regs);
> + dev_dbg(dev, "de-initialized\n");
> + return 0;
> +}
> +
> +static const struct of_device_id qoriq_usb2_phy_dt_ids[] = {
> + { .compatible = "fsl,qoriq-usb2-phy"},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(of, qoriq_usb2_phy_dt_ids);
> +
> +static struct platform_driver qoriq_usb2_phy_driver = {
> + .probe = qoriq_usb2_phy_probe,
> + .remove = qoriq_usb2_phy_remove,
> + .driver = {
> + .name = "qoriq_usb2_phy",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(qoriq_usb2_phy_dt_ids),
> + },
> +};
> +
> +module_platform_driver(qoriq_usb2_phy_driver);
> +
> +MODULE_ALIAS("platform:qoriq-usb2-phy");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("QorIQ SoC USB PHY driver");
> +MODULE_AUTHOR("Rajesh Bhagat <rajesh.bha...@nxp.com>");
> diff --git a/drivers/phy/phy-qoriq-usb2.h b/drivers/phy/phy-qoriq-usb2.h
> new file mode 100644
> index 0000000..47c37a5
> --- /dev/null
> +++ b/drivers/phy/phy-qoriq-usb2.h
> @@ -0,0 +1,50 @@
> +/*
> + * Freescale SoC USB 2.0 PHY driver
> + *
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + * Author: Rajesh Bhagat <rajesh.bha...@nxp.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#ifndef _PHY_QORIQ_USB2_H
> +#define _PHY_QORIQ_USB2_H
> +
> +#include <linux/clk.h>
> +#include <linux/phy/phy.h>
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +#define ULPI_VIEWPORT 0x170
> +
> +enum qoriq_usb2_phy_ver {
> + QORIQ_PHY_LEGACY,
> + QORIQ_PHY_NXP_ISP1508,
> + QORIQ_PHY_UNKNOWN,
> +};
> +
> +struct qoriq_usb2_phy_ctx {
> + struct phy *phy;
> + struct clk *clk;
> + struct device *dev;
> + void __iomem *regs;
> + struct usb_phy *ulpi_phy;
> + enum usb_phy_interface phy_type;
> + enum qoriq_usb2_phy_ver phy_version;
> +};
> +
> +#ifdef CONFIG_USB_ULPI_VIEWPORT
> +static inline struct usb_phy *qoriq_otg_ulpi_create(unsigned int flags)
> +{
> + return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
> +}
> +#else
> +static inline struct usb_phy *qoriq_otg_ulpi_create(unsigned int flags)
> +{
> + return NULL;
> +}
> +#endif
> +
> +#endif
> --
> 2.6.2.198.g614a2ac
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
