Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.

Signed-off-by: Steve Longerbeam <steve_longerb...@mentor.com>
Tested-by: Tim Harvey <thar...@gateworks.com>
Acked-by: Tim Harvey <thar...@gateworks.com>
Cc: Lars-Peter Clausen <l...@metafoo.de>

---

v2:
- placed call to gpiod_get inline in adv7180_probe().
- rename gpio pin to "powerdown".
- document optional powerdown-gpios property in
  Documentation/devicetree/bindings/media/i2c/adv7180.txt.
- include error number in error message on gpiod_get failure.
---
 .../devicetree/bindings/media/i2c/adv7180.txt      |  5 ++++
 drivers/media/i2c/Kconfig                          |  2 +-
 drivers/media/i2c/adv7180.c                        | 27 ++++++++++++++++++++++
 3 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt 
b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
index 0d50115..4da486f 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
@@ -15,6 +15,11 @@ Required Properties :
                "adi,adv7282"
                "adi,adv7282-m"
 
+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+  if any.
+
+
 Example:
 
        i2c0@1c22000 {
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index ce9006e..6769898 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -187,7 +187,7 @@ comment "Video decoders"
 
 config VIDEO_ADV7180
        tristate "Analog Devices ADV7180 decoder"
-       depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+       depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
        ---help---
          Support for the Analog Devices ADV7180 video decoder.
 
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 667931e9..8612d21 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-event.h>
@@ -215,6 +216,7 @@ struct adv7180_state {
        struct media_pad        pad;
        struct mutex            mutex; /* mutual excl. when accessing chip */
        int                     irq;
+       struct gpio_desc        *pwdn_gpio;
        v4l2_std_id             curr_norm;
        bool                    newavmode;
        bool                    powered;
@@ -466,6 +468,19 @@ static int adv7180_g_std(struct v4l2_subdev *sd, 
v4l2_std_id *norm)
        return 0;
 }
 
+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+       if (!state->pwdn_gpio)
+               return;
+
+       if (on) {
+               gpiod_set_value_cansleep(state->pwdn_gpio, 0);
+               usleep_range(5000, 10000);
+       } else {
+               gpiod_set_value_cansleep(state->pwdn_gpio, 1);
+       }
+}
+
 static int adv7180_set_power(struct adv7180_state *state, bool on)
 {
        u8 val;
@@ -1221,6 +1236,8 @@ static int init_device(struct adv7180_state *state)
 
        mutex_lock(&state->mutex);
 
+       adv7180_set_power_pin(state, true);
+
        adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
        usleep_range(5000, 10000);
 
@@ -1320,6 +1337,14 @@ static int adv7180_probe(struct i2c_client *client,
 
        adv7180_of_parse(state);
 
+       state->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+                                                  GPIOD_OUT_HIGH);
+       if (IS_ERR(state->pwdn_gpio)) {
+               ret = PTR_ERR(state->pwdn_gpio);
+               v4l_err(client, "request for power pin failed: %d\n", ret);
+               return ret;
+       }
+
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
                state->csi_client = i2c_new_dummy(client->adapter,
                                ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1411,6 +1436,8 @@ static int adv7180_remove(struct i2c_client *client)
        if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
                i2c_unregister_device(state->csi_client);
 
+       adv7180_set_power_pin(state, false);
+
        mutex_destroy(&state->mutex);
 
        return 0;
-- 
1.9.1

Reply via email to