[PATCH resend v2 3/5] libata-scsi: use u8 array to store mode page copy

[tom . ty89]

From: Tom Yan <tom.t...@gmail.com>

ata_mselect_*() would initialize a char array for storing a copy of
the current mode page. However, char could be signed char. In that
case, bytes larger than 127 would be converted to negative number.

For example, 0xff from def_control_mpage[] would become -1. This
prevented ata_mselect_control() from working at all, since when it
did the read-only bits check, there would always be a mismatch.

Signed-off-by: Tom Yan <tom.t...@gmail.com>

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4a4e6f1..a28e2ea94 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3610,7 +3610,7 @@ static int ata_mselect_caching(struct ata_queued_cmd *qc,
 {
        struct ata_taskfile *tf = &qc->tf;
        struct ata_device *dev = qc->dev;
-       char mpage[CACHE_MPAGE_LEN];
+       u8 mpage[CACHE_MPAGE_LEN];
        u8 wce, mask;
        int i;
 
@@ -3668,7 +3668,7 @@ static int ata_mselect_control(struct ata_queued_cmd *qc,
                               const u8 *buf, int len, u16 *fp)
 {
        struct ata_device *dev = qc->dev;
-       char mpage[CONTROL_MPAGE_LEN];
+        u8 mpage[CONTROL_MPAGE_LEN];
        u8 d_sense, mask;
        int i;
 
-- 
2.9.0