4.6-stable review patch. If anyone has any objections, please let me know.
------------------ From: Srinivas Kandagatla <[email protected]> commit d1e44b6b2823f1751ffe7e7589f545f05cfe2095 upstream. After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range. This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback. Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/regulator/qcom_smd-regulator.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -148,6 +148,17 @@ static const struct regulator_ops rpm_sm .set_load = rpm_reg_set_load, }; +static const struct regulator_ops rpm_smps_ldo_ops_fixed = { + .enable = rpm_reg_enable, + .disable = rpm_reg_disable, + .is_enabled = rpm_reg_is_enabled, + + .get_voltage = rpm_reg_get_voltage, + .set_voltage = rpm_reg_set_voltage, + + .set_load = rpm_reg_set_load, +}; + static const struct regulator_ops rpm_switch_ops = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, @@ -248,7 +259,7 @@ static const struct regulator_desc pm894 static const struct regulator_desc pm8941_lnldo = { .fixed_uV = 1740000, .n_voltages = 1, - .ops = &rpm_smps_ldo_ops, + .ops = &rpm_smps_ldo_ops_fixed, }; static const struct regulator_desc pm8941_switch = {
