This file is included from DTS files under arch/arm64 too (via
broadcom/bcm2837-rpi-3-b.dts and broadcom/bcm2837.dtsi). There is a desire
not to have skeleton.dtsi for ARM64. See commit 3ebee5a2e141 ("arm64: dts:
kill skeleton.dtsi") for rationale for its removal.As well as the addition of #*-cells also requires adding the device_type to the rpi memory node explicitly. Note that this change results in the removal of an empty /aliases node from bcm2835-rpi-a.dtb and bcm2835-rpi-a-plus.dtb. I have no hardware to check if this is a problem or not. It also results in some reordering of the nodes in the DTBs (the /aliases and /memory nodes come later). This isn't supposed to matter but, again, I've no hardware to check if it is true in this particular case. Signed-off-by: Ian Campbell <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Rob Herring <[email protected]> Cc: Frank Rowand <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Lee Jones <[email protected]> Cc: Gerd Hoffmann <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] --- v2: New patch to avoid needing to add skeleton.dtsi to arch/arm64 --- arch/arm/boot/dts/bcm2835-rpi.dtsi | 1 + arch/arm/boot/dts/bcm283x.dtsi | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index caf2707..e9b47b2 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -2,6 +2,7 @@ / { memory { + device_type = "memory"; reg = <0 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b982522..445624a 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -2,7 +2,6 @@ #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to @@ -13,6 +12,8 @@ compatible = "brcm,bcm2835"; model = "BCM2835"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; chosen { bootargs = "earlyprintk console=ttyAMA0"; -- 2.8.1
