Hi Lin,
On 2016년 08월 10일 12:26, Lin Huang wrote:
> This patch adds the documentation for rockchip rk3399 dmc driver.
>
> Signed-off-by: Lin Huang <h...@rock-chips.com>
> ---
> Changes in v5:
> -None
>
> Changes in v4:
> -None
>
> Changes in v3:
> -None
>
> Changes in v2:
> -None
>
> Changes in v1:
> -None
>
> .../devicetree/bindings/devfreq/rk3399_dmc.txt | 35
> ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
>
> diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> new file mode 100644
> index 0000000..90e9581
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
> @@ -0,0 +1,35 @@
> +* Rockchip rk3399 dmc device
dmc -> DMC(Dynamic Memory Controller ?)
> +
> +Required properties:
> +- compatible: Must be "rockchip,rk3399-dmc".
> +- devfreq-events: Node to get ddr loading, Refer to
> + Documentation/devicetree/bindings/devfreq/rockchip-dif.txt
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> + depends on the interrupt controller.
If you add the specific role of this interrupt, it would be better
to understand the operation of interrupt.
> +- clocks: Phandles for clock specified in "clock-names" property
> +- clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon";
"pclk_ddr_mon" -> "dmc_clk"
> +- operating-points-v2: Refer to
> Documentation/devicetree/bindings/power/opp.txt
> + for details.
> +- center-supply: Dmc supply node.
> +- status: Marks the node enabled/disabled.
> +
> +Optional properties:
> +- ddr_timing: ddr timing need to pass to arm trust firmware
> +- upthreshold: the upthreshold to simpleondeamnd policy
> +- downdifferential: The downdifferential to simpleondeamnd policy
> +
> +Example:
> + dmc: dmc {
> + compatible = "rockchip,rk3399-dmc";
> + devfreq-events = <&dfi>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_DDRCLK>;
> + clock-names = "dmc_clk";
> + ddr_timing = <&ddr_timing>;
I think that you should add the detailed document for
'ddr_timing' because we don't understand the 'ddr_timing' easily
, it depends on the trust firmware.
> + operating-points-v2 = <&dmc_opp_table>;
I think that you better to add the example of 'dmc_opp_table'
in the documentation.
> + center-supply = <&ppvar_centerlogic>;
> + upthreshold = <15>;
> + downdifferential = <10>;
> + status = "disabled";
> + };
> +
>
Regards,
Chanwoo Choi
