Add thermal zones, tsens and qfprom nodes

Acked-by: Eduardo Valentin <edubez...@gmail.com>
Acked-by: Rob Herring <r...@kernel.org>
Signed-off-by: Rajendra Nayak <rna...@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 64 +++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi 
b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 11bdc24..4bc047b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -155,6 +155,49 @@
                interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
        };
 
+       thermal-zones {
+               cpu-thermal0 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 4>;
+
+                       trips {
+                               cpu_alert0: trip0 {
+                                       temperature = <75000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               cpu_crit0: trip1 {
+                                       temperature = <110000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu-thermal1 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens 3>;
+
+                       trips {
+                               cpu_alert1: trip0 {
+                                       temperature = <75000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               cpu_crit1: trip1 {
+                                       temperature = <110000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+       };
+
        timer {
                compatible = "arm,armv8-timer";
                interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
@@ -609,6 +652,27 @@
                        clocks = <&gcc GCC_PRNG_AHB_CLK>;
                        clock-names = "core";
                };
+
+               qfprom: qfprom@5c000 {
+                       compatible = "qcom,qfprom";
+                       reg = <0x5c000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       tsens_caldata: caldata@d0 {
+                               reg = <0xd0 0x8>;
+                       };
+                       tsens_calsel: calsel@ec {
+                               reg = <0xec 0x4>;
+                       };
+               };
+
+               tsens: thermal-sensor@4a8000 {
+                       compatible = "qcom,msm8916-tsens";
+                       reg = <0x4a8000 0x2000>;
+                       nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+                       nvmem-cell-names = "calib", "calib_sel";
+                       #thermal-sensor-cells = <1>;
+               };
        };
 
        smd {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Reply via email to