From: Joao Pinto <[email protected]> Add a loop with timeout to make sure the iATU is really enabled before subsequent config and I/O accesses.
[bhelgaas: split to separate patch, use dev_err() instead of dev_dbg()] Signed-off-by: Joao Pinto <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> --- drivers/pci/host/pcie-designware.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index e99f56e..947fac3 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -31,7 +31,12 @@ #define LINK_WAIT_USLEEP_MIN 90000 #define LINK_WAIT_USLEEP_MAX 100000 -/* Synopsis specific PCIE configuration registers */ +/* Parameters for the waiting for iATU enabled routine */ +#define LINK_WAIT_MAX_IATU_RETRIES 5 +#define LINK_WAIT_IATU_MIN 9000 +#define LINK_WAIT_IATU_MAX 10000 + +/* Synopsys-specific PCIe configuration registers */ #define PCIE_PORT_LINK_CONTROL 0x710 #define PORT_LINK_MODE_MASK (0x3f << 16) #define PORT_LINK_MODE_1_LANES (0x1 << 16) @@ -157,7 +162,7 @@ static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size, static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index, int type, u64 cpu_addr, u64 pci_addr, u32 size) { - u32 val; + u32 retries, val; dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index, PCIE_ATU_VIEWPORT); @@ -174,7 +179,14 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index, * Make sure ATU enable takes effect before any subsequent config * and I/O accesses. */ - val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2); + for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { + val = dw_pcie_readl_rc(pp, PCIE_ATU_CR2); + if (val == PCIE_ATU_ENABLE) + return; + + usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + } + dev_err(pp->dev, "iATU is not being enabled\n"); } static struct irq_chip dw_msi_irq_chip = {
