On 25/07/16 11:57, Pratik Prajapati wrote:
> Signed-off-by: Pratik Prajapati <pratik.prajapat...@gmail.com>
Sorry it took me so long to get to this. Wading back through my
emails post holiday still.
Small issue in the documentation.
Jonathan
> ---
> Changes v1 -> v2:
> - documented current_led files in ABI
> - masked value while writing to led register
> - added blank line before last return
> - removed redundant return
>
> Documentation/ABI/testing/sysfs-bus-iio | 13 ++++++
> drivers/iio/light/vcnl4000.c | 77
> ++++++++++++++++++++++++++++++---
> 2 files changed, 84 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio
> b/Documentation/ABI/testing/sysfs-bus-iio
> index fee35c0..7129be6 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -1579,3 +1579,16 @@ Contact: linux-...@vger.kernel.org
> Description:
> Raw (unscaled no offset etc.) electric conductivity reading that
> can be processed to siemens per meter.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/in_current_led_raw
> +KernelVersion: 4.8
> +Contact: linux-...@vger.kernel.org
> +Description:
> + This controls the current to an IR LED.
It's controlling an output is it not? Rather than monitoring the current
through the LED.
Should be out_current_led_raw
Actually I think the issue is only in the docs as it looks right in the
code.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/in_current_led_scale
> +KernelVersion: 4.8
> +Contact: linux-...@vger.kernel.org
> +Description:
> + Specifies the conversion factor from the standard unit
> + to device specific unit.
out_ again.
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index 360b6e9..dcf7a6f 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -3,6 +3,7 @@
> * light and proximity sensor
> *
> * Copyright 2012 Peter Meerwald <pme...@pmeerw.net>
> + * Copyright (C) 2016 Pratik Prajapati <pratik.prajapat...@gmail.com>
> *
> * This file is subject to the terms and conditions of version 2 of
> * the GNU General Public License. See the file COPYING in the main
> @@ -11,7 +12,6 @@
> * IIO driver for VCNL4000 (7-bit I2C slave address 0x13)
> *
> * TODO:
> - * allow to adjust IR current
> * proximity threshold and event handling
> * periodic ALS/proximity measurement (VCNL4010/20)
> * interrupts (VCNL4010/20)
> @@ -46,6 +46,10 @@
> #define VCNL4000_AL_OD BIT(4) /* start on-demand ALS
> measurement */
> #define VCNL4000_PS_OD BIT(3) /* start on-demand proximity
> measurement */
>
> +/* Bit mask for LED_CURRENT register */
> +#define VCNL4000_LED_CURRENT_MASK 0x3F
> +#define VCNL4000_LED_CURRENT_MAX 20
> +
> struct vcnl4000_data {
> struct i2c_client *client;
> struct mutex lock;
> @@ -111,9 +115,43 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
> }, {
> .type = IIO_PROXIMITY,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - }
> + }, {
> + .type = IIO_CURRENT,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + .extend_name = "led",
> + .output = 1,
> + .scan_index = -1,
> + },
> };
>
> +static int vcnl4000_write_led_current_raw(struct vcnl4000_data *data, int
> val)
> +{
> + int ret;
> +
> + if (val < 0 || val > VCNL4000_LED_CURRENT_MAX)
> + return -ERANGE;
> + mutex_lock(&data->lock);
> + ret = i2c_smbus_write_byte_data(data->client, VCNL4000_LED_CURRENT,
> + VCNL4000_LED_CURRENT_MASK & val);
> + mutex_unlock(&data->lock);
> +
> + return ret;
> +}
> +
> +static int vcnl4000_read_led_current_raw(struct vcnl4000_data *data)
> +{
> + int ret;
> +
> + mutex_lock(&data->lock);
> + ret = i2c_smbus_read_byte_data(data->client, VCNL4000_LED_CURRENT);
> + mutex_unlock(&data->lock);
> + if (ret < 0)
> + return ret;
> +
> + return ret &= VCNL4000_LED_CURRENT_MASK;
> +}
> +
> static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> @@ -138,23 +176,50 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> return ret;
> return IIO_VAL_INT;
> + case IIO_CURRENT:
> + ret = vcnl4000_read_led_current_raw(data);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> default:
> return -EINVAL;
> }
> +
> case IIO_CHAN_INFO_SCALE:
> - if (chan->type != IIO_LIGHT)
> + switch (chan->type) {
> + case IIO_LIGHT:
> + *val = 0;
> + *val2 = 250000;
> + return IIO_VAL_INT_PLUS_MICRO;
> + case IIO_CURRENT:
> + /* Output register is in 10s of milliamps */
> + *val = 10;
> + return IIO_VAL_INT;
> + default:
> return -EINVAL;
> + }
>
> - *val = 0;
> - *val2 = 250000;
> - return IIO_VAL_INT_PLUS_MICRO;
> default:
> return -EINVAL;
> }
> }
>
> +static int vcnl4000_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT)
> + return vcnl4000_write_led_current_raw(data, val);
> +
> + return -EINVAL;
> +}
> +
> static const struct iio_info vcnl4000_info = {
> .read_raw = vcnl4000_read_raw,
> + .write_raw = vcnl4000_write_raw,
> .driver_module = THIS_MODULE,
> };
>
>
