This patch corrects spelling errors in the max77693 devicetree doc,
in particular example code containing typos.
Signed-off-by: Sebastiaan Schalbroeck <schalbro...@gmail.com>
---
Documentation/devicetree/bindings/mfd/max77693.txt | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt
b/Documentation/devicetree/bindings/mfd/max77693.txt
index d342584..6a1ae3a 100644
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ b/Documentation/devicetree/bindings/mfd/max77693.txt
@@ -17,28 +17,28 @@ Required properties:
- interrupt-parent : The parent interrupt controller.
Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnod
+- regulators : The regulators of max77693 have to be instantiated under subnode
named "regulators" using the following format.
regulators {
- regualtor-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
- standard regulator constratints[*].
+ regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
+ standard regulator constraints[*].
};
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
- haptic : The MAX77693 haptic device utilises a PWM controlled motor to
provide
users with tactile feedback. PWM period and duty-cycle are varied in
- order to provide the approprite level of feedback.
+ order to provide the appropriate level of feedback.
Required properties:
- - compatible : Must be "maxim,max77693-hpatic"
+ - compatible : Must be "maxim,max77693-haptic"
- haptic-supply : power supply for the haptic motor
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
PWM properties should be named "pwms". And number of cell is different
for each pwm device.
- To get more informations, please refer to documentaion.
+ To get more information, please refer to documentation.
[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
- charger : Node configuring the charger driver.
--
1.9.1
