From: "Andrew F. Davis" <[email protected]> Add binding for TPIC2810 GPO device.
Signed-off-by: Andrew F. Davis <[email protected]> Signed-off-by: Roger Quadros <[email protected]> --- Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt new file mode 100644 index 0000000..1afc2de --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt @@ -0,0 +1,16 @@ +TPIC2810 GPIO controller bindings + +Required properties: + - compatible : Should be "ti,tpic2810". + - reg : The I2C address of the device + - gpio-controller : Marks the device node as a GPIO controller. + - #gpio-cells : Should be two. For consumer use see gpio.txt. + +Example: + + gpio@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; -- 2.7.4
