On Tue, Aug 23, 2016 at 4:06 PM, Rob Herring <r...@kernel.org> wrote: > On Tue, Aug 23, 2016 at 3:00 PM, Stephen Boyd <stephen.b...@linaro.org> wrote: >> On Fri, Aug 5, 2016 at 2:40 PM, Stephen Boyd <stephen.b...@linaro.org> wrote: >>> Quoting Rob Herring (2016-07-17 19:23:55) >>>> On Thu, Jul 07, 2016 at 03:20:54PM -0700, Stephen Boyd wrote: >>>> > +------- >>>> > + >>>> > +usb { >>>> > + compatible = "vendor,usb-controller"; >>>> > + >>>> > + ulpi { >>>> > + phy { >>>> > + compatible = "vendor,phy"; >>>> > + ulpi-vendor = /bits/ 16 <0x1d6b>; >>>> > + ulpi-product = /bits/ 16 <0x0002>; >>>> > + }; >>>> > + }; >>>> >>>> I'm still having concerns about describing both phys and devices. If I >>>> have a controller with 2 ports and 2 devices attached, I'd have >>>> something like this under the USB controller: >>>> >>>> ulpi { >>>> phy@1 { >>>> }; >>>> phy@2 { >>>> }; >>>> }; >>> >>> My understanding is there would only be one status="ok" node on the ULPI >>> bus for the single phy that a usb controller would have. At the least, >>> the kernel's ULPI layer only seems to support one ULPI phy for a >>> controller right now. So even if there are two ports, it doesn't mean >>> there are two phys. >>> >>>> >>>> dev@1 { >>>> ... >>>> }; >>>> >>>> dev@2 { >>>> ... >>>> }; >>>> >>>> >>>> That doesn't seem the best, but I don't have a better suggestion. Maybe >>>> the device nodes need to go under the phy nodes? >>>> >>> >>> What if we moved the dev@1 and dev@2 to another sub node like "ports" or >>> "usb-devices"? Legacy code can support having those devices directly >>> underneath the usb controller, but future users would always need to put >>> them in a different sub-node so that we can easily differentiate the >>> different busses that a usb controller node may support? >>> >>> I'm not sure I see any need to relate the phy to the ports that are on >>> the controller, but if that is needed then perhaps you're right and we >>> should move the ports underneath the phy. USB core could be modified to >>> go through the legacy path or through the phy, if it even exists, to >>> find ports. >>> >>> Do we typically do this for other phy designs like sata or pci? The phy >>> always seemed like a parallel thing to the logical bus that the phy is >>> used for. >> >> Rob does this sound ok to you? > > Well, if there's only ever 1 phy under the controller, then as you had > it is fine. >
Ok. For ULPI I believe that's the case, but in general usb controllers can have more than one phy.