On 08/11, Rajendra Nayak wrote:
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c 
> b/drivers/clk/qcom/clk-alpha-pll.c
> index 2184dc1..68c90f3 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -113,6 +113,11 @@ static int wait_for_pll_offline(struct clk_alpha_pll 
> *pll, u32 mask)
>  #define PLL_OFFLINE_ACK              BIT(28)
>  #define PLL_ACTIVE_FLAG              BIT(30)
>  
> +/* alpha pll with dynamic update support */
> +#define PLL_UPDATE           BIT(22)
> +#define PLL_HW_LOGIC_BYPASS  BIT(23)
> +#define PLL_ACK_LATCH                BIT(29)

These need to move next to associated registers.

> +
>  void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap 
> *regmap,
>                            const struct alpha_pll_config *config)
>  {
> @@ -366,6 +402,7 @@ clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned 
> long parent_rate)
>  static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
>                                 unsigned long prate)
>  {
> +     int enabled;

bool

>       struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>       const struct pll_vco *vco;
>       u32 l, off = pll->offset;
> @@ -378,6 +415,11 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, 
> unsigned long rate,
>               return -EINVAL;
>       }
>  
> +     enabled = hw->init->ops->is_enabled(hw);

We have clk_hw_is_enabled() for this.

> +
> +     if (!(pll->flags & SUPPORTS_DYNAMIC_UPDATE) && enabled)
> +             hw->init->ops->disable(hw);

Please call the function directly instead of going through the
init structure to get the clk ops.

> +
>       a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH);
>  
>       regmap_write(pll->clkr.regmap, off + PLL_L_VAL, l);
> @@ -391,6 +433,12 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, 
> unsigned long rate,
>       regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL, PLL_ALPHA_EN,
>                          PLL_ALPHA_EN);
>  
> +     if (!(pll->flags & SUPPORTS_DYNAMIC_UPDATE) && enabled)
> +             hw->init->ops->enable(hw);
> +
> +     if (pll->flags & SUPPORTS_DYNAMIC_UPDATE)
> +             clk_alpha_pll_dynamic_update(pll);
> +

Perhaps write it as

        if (pll->flags & SUPPORTS_DYNAMIC_UPDATE)
                clk_alpha_pll_dynamic_update()
        else if (enabled)
                toggle the enable bit...

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Reply via email to