From: Mirza Krak <mirza.k...@gmail.com> Hi.
This is a follow up to my previous RFC to add support for Tegra GMI bus controller. I have tested this series on a Tegra30 using a Colibri T30 SOM on a custom carrier board which has multiple CAN controllers (SJA1000) connected to the GMI bus. I have rebased on top of latest tegra/for-next in V2. Also see individual patches for changes in V2. See below links for previous discussions. Comments on RFC: https://marc.info/?l=linux-clk&m=146893557629903&w=2 https://marc.info/?l=linux-tegra&m=146893541829801&w=2 https://marc.info/?l=linux-tegra&m=146893542429814&w=2 Comments on V1: https://marc.info/?l=linux-arm-kernel&m=147051551821122&w=2 https://marc.info/?l=linux-arm-kernel&m=147051553121150&w=2 https://marc.info/?l=linux-arm-kernel&m=147194856600627&w=2 https://marc.info/?l=linux-arm-kernel&m=147072742432211&w=2 Mirza Krak (6): clk: tegra: add TEGRA20_CLK_NOR to init table clk: tegra: add TEGRA30_CLK_NOR to init table dt/bindings: Add bindings for Tegra GMI controller ARM: tegra: Add Tegra30 GMI support ARM: tegra: Add Tegra20 GMI support bus: Add support for Tegra Generic Memory Interface .../devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 132 ++++++++++++ arch/arm/boot/dts/tegra20.dtsi | 13 ++ arch/arm/boot/dts/tegra30.dtsi | 12 ++ drivers/bus/Kconfig | 8 + drivers/bus/Makefile | 1 + drivers/bus/tegra-gmi.c | 231 +++++++++++++++++++++ drivers/clk/tegra/clk-tegra20.c | 1 + drivers/clk/tegra/clk-tegra30.c | 1 + 8 files changed, 399 insertions(+) create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt create mode 100644 drivers/bus/tegra-gmi.c -- 2.1.4