Add documentation for lt070me05000 panel

Cc: Archit Taneja <archit.tan...@gmail.com>
Cc: John Stultz <john.stu...@linaro.org>
Cc: Thierry Reding <thierry.red...@gmail.com>
Cc: Sumit Semwal <sumit.sem...@linaro.org>
Signed-off-by: Vinay Simha BN <simha...@gmail.com>
Acked-by: Rob Herring <r...@kernel.org>

---
v2:
 * incorporated rob herring and thierry reviews
   gpio to gpios, gpio to regulator using fixed regulators
   and pwm backlight is removed, since it is controlled by
   dcs commands

v3:
 * incorporated thierry reviews
   - Added gpio polarity details for reset-gpios
   - proper naming conventions and sequence wrt panel datasheet
     (vddp-supply, iovcc-supply,
      enable-gpios, reset-gpios, dcdc-en-gpios)
---
 .../bindings/display/panel/jdi,lt070me05000.txt    | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt

diff --git 
a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt 
b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
new file mode 100644
index 0000000..4724952
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
@@ -0,0 +1,33 @@
+JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+Required properties:
+- compatible: should be "jdi,lt070me05000"
+- vddp-supply: phandle of the regulator that provides the supply voltage
+  Power IC supply (3-5V)
+- iovcc-supply: phandle of the regulator that provides the supply voltage
+  IOVCC , power supply for LCM (1.8V)
+- enable-gpios: phandle of gpio for enable line
+  LED_EN, LED backlight enable, High active
+- reset-gpios: phandle of gpio for reset line
+  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+  XRES, Reset, Low active
+- dcdc-en-gpios: phandle of the gpio for power ic line
+  Power IC supply enable, High active
+
+Example:
+
+       dsi0: qcom,mdss_dsi@4700000 {
+               panel@0 {
+                       compatible = "jdi,lt070me05000";
+                       reg = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&dsi_panel_pinctrl>;
+
+                       vddp-supply = <&pm8921_l17>;
+                       iovcc-supply = <&pm8921_lvs7>;
+
+                       enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+                       reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+                       dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+               };
+       };
-- 
2.1.2

Reply via email to