Hello Chanwoo,
The patch looks good to me, I just have a few minor comments:
On 08/24/2016 09:49 AM, Chanwoo Choi wrote:
[snip]
> +
> + reboot: syscon-reboot {
> + compatible = "syscon-reboot";
> + regmap = <&pmu_system_controller>;
> + offset = <0x400>;
Maybe adding a comment that the register is SWRESET to be consistent with the
arm32 Exynos node definition in arch/arm/boot/dts/exynos-syscon-restart.dtsi?
[snip]
> +
> + tmu_atlas0: tmu@10060000 {
> + compatible = "samsung,exynos5433-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <0 95 0>;
For some interrupts definitions, you are using the GIC interrupt type macros
while for others like this you are using the constant numbers. I think would
be better to use the macros consistently (i.e: interrupts = <GIC_SPI 95 0>).
[snip]
> + mipi_phy: video-phy@105C0708 {
> + compatible = "samsung,exynos5433-mipi-video-phy";
> + #phy-cells = <1>;
> + samsung,pmu-syscon = <&pmu_system_controller>;
> + samsung,cam0-sysreg = <&syscon_cam0>;
> + samsung,cam1-sysreg = <&syscon_cam1>;
> + samsung,disp-sysreg = <&syscon_disp>;
> + };
This node has a unit name but it doesn't have a reg property so dtc will
warn about the mismatch when executed with W=1.
[snip]
> + usbdrd30: usb@15400000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
> + <&cmu_fsys CLK_SCLK_USBDRD30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
> + <&cmu_top CLK_DIV_SCLK_USBDRD30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
Ditto, the node has unit address but no reg property.
> + dwc3 {
> + compatible = "snps,dwc3";
> + reg = <0x15400000 0x10000>;
Ditto, the node doesn't have a unit address but has reg property.
> + interrupts = <0 231 0>;
> + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
> +
> + usbhost30: usb@15a00000 {
> + compatible = "samsung,exynos5250-dwusb3";
> + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
> + <&cmu_fsys CLK_SCLK_USBHOST30>;
> + clock-names = "usbdrd30", "usbdrd30_susp_clk";
> + assigned-clocks =
> + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
> + <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
> + <&cmu_top CLK_DIV_SCLK_USBHOST30>;
> + assigned-clock-parents =
> + <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
> + <&cmu_top CLK_MOUT_BUS_PLL_USER>;
> + assigned-clock-rates = <0>, <0>, <66700000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + status = "disabled";
> +
Ditto, the node has unit address but no reg property.
> + usbdrd_dwc3_0: dwc3 {
> + compatible = "snps,dwc3";
> + reg = <0x15a00000 0x10000>;
Ditto, the node doesn't have a unit address but has reg property.
> + interrupts = <0 244 0>;
> + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + };
> + };
> +
[snip]
> + audio-subsystem {
> + compatible = "samsung,exynos5433-lpass";
> + reg = <0x11400000 0x100>, <0x11500000 0x08>;
Ditto, the node doesn't have a unit address but has reg property.
Reviewed-by: Javier Martinez Canillas <jav...@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
