Hi Arnd,
On ven., août 26 2016, Arnd Bergmann <a...@arndb.de> wrote:
> The SPI controller in the arch/arm/boot/dts/armada-39x.dtsi file has moved
> to a different location in the hierarchy, which breaks the overrides
> in the board specific file:
>
> Warning (reg_format): "reg" property in
> /soc/internal-regs/spi@10680/spi-flash@1 has invalid length (4 bytes)
> (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value
> for /soc/internal-regs/spi@10680/spi-flash@1
>
> This changes the board to reference the spi controller by its label
> (which has not changed) rather than the full path.
>
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> Fixes: 0160a4b68987 ("ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller
> nodes into 'soc' node")
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-390-db.dts | 60
> ++++++++++++++++++-------------------
> 1 file changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-390-db.dts
> b/arch/arm/boot/dts/armada-390-db.dts
> index 9d0d9b2e9bfc..34e279d973c8 100644
> --- a/arch/arm/boot/dts/armada-390-db.dts
> +++ b/arch/arm/boot/dts/armada-390-db.dts
> @@ -66,36 +66,6 @@
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
>
> internal-regs {
> - spi@10680 {
> - status = "okay";
> - pinctrl-0 = <&spi1_pins>;
> - pinctrl-names = "default";
> -
> - spi-flash@1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "n25q128a13",
> - "jedec,spi-nor";
> - reg = <0>; /* Chip select 0 */
> - spi-max-frequency = <108000000>;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "U-Boot";
> - reg = <0 0x400000>;
> - };
> - partition@400000 {
> - label = "Filesystem";
> - reg = <0x400000
> 0xc00000>;
> - };
> - };
> - };
> - };
> -
> i2c@11000 {
> status = "okay";
> clock-frequency = <100000>;
> @@ -173,3 +143,33 @@
> };
> };
> };
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-0 = <&spi1_pins>;
> + pinctrl-names = "default";
> +
> + spi-flash@1 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13",
> + "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "U-Boot";
> + reg = <0 0x400000>;
> + };
> + partition@400000 {
> + label = "Filesystem";
> + reg = <0x400000 0xc00000>;
> + };
> + };
> + };
> +};
> --
> 2.9.0
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
