Signed-off-by: Andrew Jeffery <and...@aj.id.au>
Acked-by: Joel Stanley <j...@jms.id.au>
---
.../devicetree/bindings/gpio/gpio-aspeed.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
new file mode 100644
index 000000000000..09f26cac18d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -0,0 +1,36 @@
+Aspeed GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- #gpio-cells : Should be two
+ - First cell is the GPIO line number
+ - Second cell is used to specify optional
+ parameters (unused)
+
+- compatible : Either "aspeed,ast2400-gpio" or "aspeed,ast2500-gpio"
+
+- reg : Address and length of the register set for the device
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt specifier (see interrupt bindings for
+ details)
+- interrupt-controller : Mark the GPIO controller as an interrupt-controller
+
+Optional properties:
+
+- interrupt-parent : The parent interrupt controller, optional if inherited
+
+The gpio and interrupt properties are further described in their respective
+bindings documentation:
+
+- Documentation/devicetree/bindings/gpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+ Example:
+ gpio@1e780000 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2400-gpio";
+ gpio-controller;
+ interrupts = <20>;
+ reg = <0x1e780000 0x1000>;
+ interrupt-controller;
+ };
--
2.9.3.1.g0db844e
