On Wed, Aug 24, 2016 at 10:49:10PM +0900, Chanwoo Choi wrote:
> This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> This board fully support the all things for mobile target.
> 
> This patch supports the following devices:
> 1. basic SoC
> - Initial booting for Samsung Exynos5433 SoC
> - DRAM LPDDR3 (3GB)
> - eMMC (32GB)
> - ARM architecture timer
> 
> 2. power management devices
> - Sasmung S2MPS13 PMIC for the power supply
> - CPUFREQ for big.LITTLE cores
> - TMU for big.LITTLE cores and GPU
> - ADC with thermistor to measure the temperature of AP/Battery/Charger
> - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
> 
> 3. sound devices
> - I2S for sound bus
> - LPASS for sound power control
> - Wolfson WM5110 for sound codec
> - Maxim MAX98504 for speaker amplifier
> - TM2 ASoC Machine device driver node
> 
> 3. display devices
> - DECON, DSI and MIC for the panel output
> 
> 4. usb devices
> - USB 3.0 DRD (Dual Role Device)
> - USB 3.0 Host controller
> 
> 5. storage devices
> - MSHC (Mobile Storae Host Controller) for eMMC device
> 
> 6. misc devices
> - gpio-keys (power, volume up/down, home key)
> - PWM (Pulse Width Modulation Timer)
> 
> Signed-off-by: Chanwoo Choi <[email protected]>
> Signed-off-by: Jaehoon Chung <[email protected]>
> Signed-off-by: Seung-Woo Kim <[email protected]>
> Signed-off-by: Joonyoung Shim <[email protected]>
> Signed-off-by: Inki Dae <[email protected]>
> Signed-off-by: Jonghwa Lee <[email protected]>
> Signed-off-by: Beomho Seo <[email protected]>
> Signed-off-by: Jaewon Kim <[email protected]>
> Signed-off-by: Hyungwon Hwang <[email protected]>
> Signed-off-by: Inha Song <[email protected]>
> Signed-off-by: Ingi kim <[email protected]>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> Signed-off-by: Marek Szyprowski <[email protected]>
> Signed-off-by: Andrzej Hajda <[email protected]>
> Signed-off-by: Sylwester Nawrocki <[email protected]>
> ---
>  .../bindings/arm/samsung/samsung-boards.txt        |   1 +
>  arch/arm64/boot/dts/exynos/Makefile                |   5 +-
>  arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      | 985 
> +++++++++++++++++++++
>  3 files changed, 990 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt 
> b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 0ea7f14ef294..c704b4bf6137 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -15,6 +15,7 @@ Required root node properties:
>       - "samsung,xyref5260"   - for Exynos5260-based Samsung board.
>       - "samsung,smdk5410"    - for Exynos5410-based Samsung SMDK5410 eval 
> board.
>       - "samsung,smdk5420"    - for Exynos5420-based Samsung SMDK5420 eval 
> board.
> +     - "samsung,tm2"         - for Exynos5333-based Samsung TM2 board.

This does not match...

> +     compatible = "samsung,exynos5433-tm2", "samsung,exynos5433";

Is it 5433 or 5333?

> +
> +     aliases {
> +             pinctrl0 = &pinctrl_alive;
> +             pinctrl1 = &pinctrl_aud;
> +             pinctrl2 = &pinctrl_cpif;
> +             pinctrl3 = &pinctrl_ese;
> +             pinctrl4 = &pinctrl_finger;
> +             pinctrl5 = &pinctrl_fsys;
> +             pinctrl6 = &pinctrl_imem;
> +             pinctrl7 = &pinctrl_nfc;
> +             pinctrl8 = &pinctrl_peric;
> +             pinctrl9 = &pinctrl_touch;

Drop all these.

> +             serial0 = &serial_0;
> +             serial1 = &serial_1;
> +             serial2 = &serial_2;
> +             serial3 = &serial_3;

> +             spi0 = &spi_0;
> +             spi1 = &spi_1;
> +             spi2 = &spi_2;
> +             spi3 = &spi_3;
> +             spi4 = &spi_4;

And these.

Reply via email to