On Wed, Aug 31, 2016 at 4:25 PM, Milo Kim <[email protected]> wrote:
> H3 PA5 pin is assigned for single PWM channel.
>
> Cc: Rob Herring <[email protected]>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Milo Kim <[email protected]>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index fdf9fdb..05d0c4b 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -360,6 +360,13 @@
> allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> };
>
> + pwm0_pin_a: pwm0@0 {
This is the only possible configuration. You can drop the _a suffix
from the label, and @0 from the node name.
ChenYu
> + allwinner,pins = "PA5";
> + allwinner,function = "pwm0";
> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };
> +
> uart0_pins_a: uart0@0 {
> allwinner,pins = "PA4", "PA5";
> allwinner,function = "uart0";
> --
> 2.9.3
>
