Hi,
On 31-08-16 18:22, Maxime Ripard wrote:
On Mon, Aug 29, 2016 at 10:18:32PM +0800, Icenowy Zheng wrote:
UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card
on iNet D978 Rev2 board.
Enable the UART1 to make it possible to use the modified hciattach by
Realtek to drive the BT part of RTL8723BS.
On the board no r_uart pins are found now (the onboard RX/TX pins are
wired to PF2/PF4, which is muxed with mmc0), so also disabled it.
Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
I'll make the same comments than in the v2.
https://www.spinics.net/lists/arm-kernel/msg527001.html
I've a feeling there is a bit of miscommunication here,
let me try to clarify things:
Icenowy, Maxime wants you to split this into 2 patches:
1) Adding just the uart1_pins_a and uart1_pins_cts_rts_a nodes to
sun8i-a23-a33.dtsi; and
2) Another patch with the sun8i-a33-inet-d978-rev2.dts changes
And for 2. Maxime wants you to change:
aliases {
/delete-property/serial0;
serial1 = &uart1;
};
to:
aliases {
serial0 = &uart1;
};
There is no serial0 and Maxime wants the serial-s
to be numbered starting at 0 (iow there is no reason
to make the bluetooth uart serial1).
Regards,
Hans
