Add act8945a-charger as a sub-device node.
Use the "interrupts" property, instead of the "active-semi,irq_gpios"
to denote the act8945a chager's irq.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
---
Changes in v9:
- Not include seven patches which have been queued or applied.
Changes in v8:
- Add 4 new patches: 1/11, 2/11, 9/11, and 11/11.
Changes in v7: None
Changes in v6: None
Changes in v4: None
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 0b9a59d..87eff10 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -162,14 +162,6 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA 12
GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA 72
GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA 45
GPIO_ACTIVE_LOW>;
-
active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev
&pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
@@ -222,6 +214,21 @@
regulator-always-on;
};
};
+
+ charger {
+ compatible =
"active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 =
<&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <45
GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios =
<&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA
72 GPIO_ACTIVE_LOW>;
+
active-semi,input-voltage-threshold-microvolt = <6600>;
+
active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
};
};
--
2.7.4
