Hello Krzysztof,
On 09/01/2016 11:28 AM, Krzysztof Kozlowski wrote:
> On 09/01/2016 11:19 AM, Javier Martinez Canillas wrote:
>> Hello Krzysztof,
>>
>> On 09/01/2016 11:05 AM, Krzysztof Kozlowski wrote:
>>> On 09/01/2016 10:43 AM, Javier Martinez Canillas wrote:
>>>>>> --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
>>>>>> +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
>>>>>> @@ -21,6 +21,11 @@
>>>>>> bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel
>>>>>> earlyprintk no_console_suspend mem=2048M@0x80000000
>>>>>> mem=6144M@0x100000000 console=ttySAC0,115200";
>>>>>> };
>>>>>>
>>>>>> + memory {
>>>>>> + device_type = "memory";
>>>>>> + reg = <0 0>;
>>>>>> + };
>>>>>
>>>>> This looks okay, but the default size and address cells won't be
>>>>> present. Won't that be a problem?
>>>>>
>>>>
>>>> They will be present since at this point exynos5440.dtsi is still including
>>>> exynos5440.dtsi, we are just overriding the memory node with the same
>>>> values
>>>> than skeleton.dtsi so this can be removed later in patch 7/7.
>>>
>>> I don't get it. exynos5440.dtsi does not set size/address cells in top node.
>>>
>>
>> Sorry, maybe I'm misunderstanding your question. The size/address cells are
>> set
>> in the top node by exynos5440.dtsi including the skeleton.dtsi (since these
>> are
>> set in that included dtsi).
>
> Where? Nothing in my sources...
>
> 15 / {
> 16 compatible = "samsung,exynos5440", "samsung,exynos5";
> 17
> 18 interrupt-parent = <&gic>;
>
No, I meant that these are set by the fact that exynos5440.dtsi is including
the skeleton.dtsi, since the dtsi set these properties in the top node.
>>
>> IOW, scripts/dtc/dtx_diff doesn't show differences for these exynos5440 DTB
>> before and after $SUBJECT.
>
> Maybe these are also the default values so no differences... stating
> them explicitly would be useful.
>
I could do it in this patch... but I don't see why that should be needed since:
a) All the others Exynos SoC dtsi file don't explicitly set these properties
since are set by skeleton.dtsi when including it. So not adding them keeps
exynos5440.dtsi consistent with the other SoC dtsi.
b) Adding those to the Exynos SoC dtsi when removing the skeleton.dtsi is done
in a later patch of this series. Again, making it consistent with all the
Exynos SoC dtsi since none will include skeleton.dtsi anymore.
> Best regards,
> Krzysztof
>
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
