On Fri, Sep 2, 2016 at 2:49 AM, Archit Taneja <[email protected]> wrote: > Hi, > > > On 8/30/2016 5:11 AM, John Stultz wrote: >> >> From: Andy Green <[email protected]> >> >> Set the initial audio packet settings to allow the audio >> driver to work. >> >> Cc: David Airlie <[email protected]> >> Cc: Archit Taneja <[email protected]> >> Cc: Laurent Pinchart <[email protected]> >> Cc: Wolfram Sang <[email protected]> >> Cc: Srinivas Kandagatla <[email protected]> >> Cc: "Ville Syrjälä" <[email protected]> >> Cc: Boris Brezillon <[email protected]> >> Cc: Andy Green <[email protected]> >> Cc: Dave Long <[email protected]> >> Cc: Guodong Xu <[email protected]> >> Cc: Zhangfei Gao <[email protected]> >> Cc: Mark Brown <[email protected]> >> Cc: Lars-Peter Clausen <[email protected]> >> Cc: Jose Abreu <[email protected]> >> Cc: [email protected] >> Signed-off-by: Andy Green <[email protected]> >> [jstultz: Forward ported to mainline, changed to use register >> names rather then hex values, and removed config values set by >> audio driver.] >> Signed-off-by: John Stultz <[email protected]> >> --- >> drivers/gpu/drm/bridge/adv7511/adv7533.c | 22 ++++++++++++++++++++++ >> 1 file changed, 22 insertions(+) >> >> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c >> b/drivers/gpu/drm/bridge/adv7511/adv7533.c >> index 6798ecf..cced7c9 100644 >> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c >> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c >> @@ -104,6 +104,28 @@ void adv7533_dsi_power_on(struct adv7511 *adv) >> /* disable test mode */ >> regmap_write(adv->regmap_cec, 0x55, 0x00); >> >> + /* hide Audio infoframe updates */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_INFOFRAME_UPDATE, >> + BIT(5), BIT(5)); >> + /* enable N/CTS, enable Audio sample packets */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1, >> + BIT(5), BIT(5)); >> + /* enable N/CTS */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1, >> + BIT(6), BIT(6)); >> + /* not copyrighted */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_AUDIO_CFG1, >> + BIT(5), BIT(5)); >> + /* enable audio infoframes */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1, >> + BIT(3), BIT(3)); >> + /* AV mute disable */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_GC(0), >> + BIT(7) | BIT(6), BIT(7)); >> + /* use Audio infoframe updated info */ >> + regmap_update_bits(adv->regmap, ADV7511_REG_GC(1), >> + BIT(5), 0); >> + > > > Wouldn't these writes be needed by ADV751x chips too? These seem to > belong to the main ADV75xx regmap. These should probably be a separate func > in adv7511_audio.c or adv7511_drv.c, and it should be called in > adv7511_power_on, so that ADV751x chips can utilize this too.
Yea. It seems like folding this into the audio_startup() function is the best thing here, so I've done so and it seems to be working well. Will resend here shortly. thanks -john
