[PATCH v4 4/8] dts: sun8i-h3: move uart1 pinmux/peripheral assocation to DSTI

[jorik]

From: Jorik Jonker <jo...@kippendief.biz>

Users using this UART without RTS/CTS should override the association in
their board specific DTS. All (1) board using this UART uses RTS/CTS, so
this breaks nothing.

Signed-off-by: Jorik Jonker <jo...@kippendief.biz>
---
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 2 --
 arch/arm/boot/dts/sun8i-h3.dtsi                 | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts 
b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index c874270..4c86e45 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -182,8 +182,6 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_rts_cts_pins>;
        status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 6635f3d..685755c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -414,6 +414,8 @@
                        resets = <&ccu RST_BUS_UART1>;
                        dmas = <&dma 7>, <&dma 7>;
                        dma-names = "rx", "tx";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart1_rts_cts_pins>;
                        status = "disabled";
                };
 
-- 
2.7.4