On Fri, Sep 09, 2016 at 02:45:13PM +0200, Corentin Labbe wrote: > The sun8i-emac is an ethernet MAC hardware that support 10/100/1000 > speed. > > This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree. > The SoC H3 have an internal PHY, so optionals syscon and ephy are set. > > Signed-off-by: Corentin Labbe <[email protected]> > --- > arch/arm/boot/dts/sun8i-h3.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index a39da6f..a3ac476 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -50,6 +50,10 @@ > / { > interrupt-parent = <&gic>; > > + aliases { > + ethernet0 = &emac; > + }; > +
This needs to be done at the board level.
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -446,6 +450,21 @@
> status = "disabled";
> };
>
> + emac: ethernet@1c30000 {
> + compatible = "allwinner,sun8i-h3-emac";
> + syscon = <&syscon>;
> + reg = <0x01c30000 0x104>;
> + reg-names = "emac";
You don't need reg-names anymore.
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>;
> + reset-names = "ahb", "ephy";
> + clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>;
> + clock-names = "ahb", "ephy";
I still believe that having the same node for both the PHY and the MAC
is wrong.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
