Split dlink_dsr-1000n.dts to allow reuse with D-Link DSR-500N.

Signed-off-by: Aaro Koskinen <aaro.koski...@iki.fi>
---
 .../boot/dts/cavium-octeon/dlink_dsr-1000n.dts     | 45 +----------------
 .../dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi    | 58 ++++++++++++++++++++++
 2 files changed, 59 insertions(+), 44 deletions(-)
 create mode 100644 arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi

diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts 
b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index b134798..cfa2915 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -8,55 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "dlink,dsr-1000n";
 
        soc@0 {
-               smi0: mdio@1180000001800 {
-                       phy8: ethernet-phy@8 {
-                               reg = <8>;
-                               compatible = "ethernet-phy-ieee802.3-c22";
-                       };
-               };
-
-               pip: pip@11800a0000000 {
-                       interface@0 {
-                               ethernet@0 {
-                                       fixed-link {
-                                               speed = <1000>;
-                                               full-duplex;
-                                       };
-                               };
-                               ethernet@1 {
-                                       fixed-link {
-                                               speed = <1000>;
-                                               full-duplex;
-                                       };
-                               };
-                               ethernet@2 {
-                                       phy-handle = <&phy8>;
-                               };
-                       };
-               };
-
-               twsi0: i2c@1180000001000 {
-                       rtc@68 {
-                               compatible = "dallas,ds1337";
-                               reg = <0x68>;
-                       };
-               };
-
                uart0: serial@1180000000800 {
                        clock-frequency = <500000000>;
                };
-
-               usbn: usbn@1180068000000 {
-                       refclk-frequency = <12000000>;
-                       refclk-type = "crystal";
-               };
        };
 
        leds {
@@ -87,8 +48,4 @@
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
        };
-
-       aliases {
-               pip = &pip;
-       };
 };
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi 
b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 0000000..246b598
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koski...@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+       soc@0 {
+               smi0: mdio@1180000001800 {
+                       phy8: ethernet-phy@8 {
+                               reg = <8>;
+                               compatible = "ethernet-phy-ieee802.3-c22";
+                       };
+               };
+
+               pip: pip@11800a0000000 {
+                       interface@0 {
+                               ethernet@0 {
+                                       fixed-link {
+                                               speed = <1000>;
+                                               full-duplex;
+                                       };
+                               };
+                               ethernet@1 {
+                                       fixed-link {
+                                               speed = <1000>;
+                                               full-duplex;
+                                       };
+                               };
+                               ethernet@2 {
+                                       phy-handle = <&phy8>;
+                               };
+                       };
+               };
+
+               twsi0: i2c@1180000001000 {
+                       rtc@68 {
+                               compatible = "dallas,ds1337";
+                               reg = <0x68>;
+                       };
+               };
+
+               usbn: usbn@1180068000000 {
+                       refclk-frequency = <12000000>;
+                       refclk-type = "crystal";
+               };
+       };
+
+       aliases {
+               pip = &pip;
+       };
+};
-- 
2.9.2

Reply via email to