On Fri, Sep 16, 2016 at 3:51 AM, Lars-Peter Clausen <[email protected]> wrote: > On 09/07/2016 01:22 AM, John Stultz wrote: >> This patch adds support to Audio for both adv7511 and adv7533 >> bridge chips. >> >> This patch was originally from [1] by Lars-Peter Clausen <[email protected]> >> and was adapted by Archit Taneja <[email protected]> and >> Srinivas Kandagatla <[email protected]>. >> >> Then I heavily reworked it to use the hdmi-codec driver. And also >> folded in some audio packet initialization done by Andy Green >> <[email protected]>. So credit to them, but blame to me. >> >> [1] >> https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/gpu/drm/i2c/adv7511_audio.c >> >> Cc: David Airlie <[email protected]> >> Cc: Archit Taneja <[email protected]> >> Cc: Laurent Pinchart <[email protected]> >> Cc: Wolfram Sang <[email protected]> >> Cc: Srinivas Kandagatla <[email protected]> >> Cc: "Ville Syrjälä" <[email protected]> >> Cc: Boris Brezillon <[email protected]> >> Cc: Andy Green <[email protected]> >> Cc: Dave Long <[email protected]> >> Cc: Guodong Xu <[email protected]> >> Cc: Zhangfei Gao <[email protected]> >> Cc: Mark Brown <[email protected]> >> Cc: Lars-Peter Clausen <[email protected]> >> Cc: Jose Abreu <[email protected]> >> Cc: [email protected] >> Signed-off-by: John Stultz <[email protected]> > > I'm not to fond of the hdmi-codec stuff, but within its context this looks > ok. Thanks for getting this upstream ready. Just one tiny bit regarding the > Kconfig entry. > > If that is fixed feel free to add on the next revision: > > Acked-by: Lars-Peter Clausen <[email protected]> > >> --- >> v3: >> * Allowed audio support to be configured in or out, as suggested by Laurent >> * Minor cleanups suggested by Laurent >> * Folded in Andy's audio packet initialization patch, as suggested by Archit >> >> drivers/gpu/drm/bridge/adv7511/Kconfig | 9 ++ >> drivers/gpu/drm/bridge/adv7511/Makefile | 1 + >> drivers/gpu/drm/bridge/adv7511/adv7511.h | 16 ++ >> drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 213 >> +++++++++++++++++++++++++ >> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 4 + >> 5 files changed, 243 insertions(+) >> create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c >> >> diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig >> b/drivers/gpu/drm/bridge/adv7511/Kconfig >> index d2b0499..b303ad1 100644 >> --- a/drivers/gpu/drm/bridge/adv7511/Kconfig >> +++ b/drivers/gpu/drm/bridge/adv7511/Kconfig >> @@ -3,9 +3,18 @@ config DRM_I2C_ADV7511 >> depends on OF >> select DRM_KMS_HELPER >> select REGMAP_I2C >> + select SND_SOC_HDMI_CODEC if SND_SOC > > This seems to be redundant considering the select done by > DRM_I2C_ADV7511_AUDIO. > >> help >> Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders. >> >> +config DRM_I2C_ADV7511_AUDIO >> + tristate "ADV7511 HDMI Audio driver" > > This should be bool. It either gets built into the ADV7511 driver (which > itself could either be a module or built-in) or not. But setting this option > itself to module wont work.
Ah! Thanks for the catch here! I really appreciate the feedback! I'll integrate those changes and respin the patch here shortly! thanks -john
