Hi Gabriele,

Thanks for your persistence! Both patches look good. Can you fix the
build issues reported by kbuild?

On 14/09/2016 at 21:08:40 +0200, Gabriele Mazzotta wrote :
> Currently ACPI-driven alarms are not cleared when they wake the
> system. As consequence, expired alarms must be manually cleared to
> program a new alarm. Fix this by correctly handling ACPI-driven
> alarms.
> 
> More specifically, the ACPI specification [1] provides for two
> alternative implementations of the RTC. Depending on the
> implementation, the driver either clear the alarm from the resume
> callback or from ACPI interrupt handler:
> 
>  - The platform has the RTC wakeup status fixed in hardware
>    (ACPI_FADT_FIXED_RTC is 0). In this case the driver can determine
>    if the RTC was the reason of the wakeup from the resume callback
>    by reading the RTC status register.
> 
>  - The platform has no fixed hardware feature event bits. In this
>    case a GPE is used to wake the system and the driver clears the
>    alarm from its handler.
> 
> [1] http://www.acpi.info/DOWNLOADS/ACPI_5_Errata%20A.pdf
> 
> Signed-off-by: Gabriele Mazzotta <gabriele....@gmail.com>
> ---
>  drivers/rtc/rtc-cmos.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
> index 1dec52f..6042257 100644
> --- a/drivers/rtc/rtc-cmos.c
> +++ b/drivers/rtc/rtc-cmos.c
> @@ -939,6 +939,22 @@ static int cmos_resume(struct device *dev)
>                       tmp &= ~RTC_AIE;
>                       hpet_mask_rtc_irq_bit(RTC_AIE);
>               } while (mask & RTC_AIE);
> +
> +             if ((tmp & RTC_AIE) &&
> +                 !(acpi_gbl_FADT.flags & ACPI_FADT_FIXED_RTC)) {
> +                     acpi_status status;
> +                     acpi_event_status rtc_status;
> +
> +                     status = acpi_get_event_status(ACPI_EVENT_RTC,
> +                                                    &rtc_status);
> +                     if (ACPI_FAILURE(status)) {
> +                             dev_err(dev, "Could not get RTC status\n");
> +                     } else if (rtc_status & ACPI_EVENT_FLAG_SET) {
> +                             tmp &= ~RTC_AIE;
> +                             CMOS_WRITE(tmp, RTC_CONTROL);
> +                             rtc_update_irq(cmos->rtc, 1, mask);
> +                     }
> +             }
>       }
>       spin_unlock_irq(&rtc_lock);
>  
> @@ -976,6 +992,22 @@ static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, 
> cmos_resume);
>  static u32 rtc_handler(void *context)
>  {
>       struct device *dev = context;
> +     struct cmos_rtc *cmos = dev_get_drvdata(dev);
> +     unsigned char rtc_control;
> +     unsigned char rtc_intr;
> +
> +     spin_lock_irq(&rtc_lock);
> +     if (!cmos_rtc.suspend_ctrl)
> +             rtc_control = cmos_rtc.suspend_ctrl;
> +     else
> +             rtc_control = CMOS_READ(RTC_CONTROL);
> +     if (rtc_control & RTC_AIE) {
> +             cmos_rtc.suspend_ctrl &= ~RTC_AIE;
> +             CMOS_WRITE(rtc_control, RTC_CONTROL);
> +             rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
> +             rtc_update_irq(cmos->rtc, 1, rtc_intr);
> +     }
> +     spin_unlock_irq(&rtc_lock);
>  
>       pm_wakeup_event(dev, 0);
>       acpi_clear_event(ACPI_EVENT_RTC);
> -- 
> 2.9.3
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Reply via email to