The CS5520 isn't just an ATA controller and we must not
pci_disable_device it as it turns into pci_disable_computer.
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.20-mm2/drivers/ata/pata_cs5520.c
linux-2.6.20-mm2/drivers/ata/pata_cs5520.c
--- linux.vanilla-2.6.20-mm2/drivers/ata/pata_cs5520.c 2007-02-20
13:37:58.000000000 +0000
+++ linux-2.6.20-mm2/drivers/ata/pata_cs5520.c 2007-02-20 13:52:42.000000000
+0000
@@ -325,6 +325,30 @@
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
}
+
+/**
+ * cs5520_pci_device_suspend - device suspend
+ * @pdev: PCI device
+ *
+ * We have to cut and waste bits from the standard method because
+ * the 5520 is a bit odd and not just a pure ATA device. As a result
+ * we must not disable it. The needed code is short and this avoids
+ * chip specific mess in the core code.
+ */
+
+static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ pci_save_state(pdev);
+ return 0;
+}
+
/* For now keep DMA off. We can set it for all but A rev CS5510 once the
core ATA code can handle it */
@@ -340,7 +364,7 @@
.id_table = pata_cs5520,
.probe = cs5520_init_one,
.remove = cs5520_remove_one,
- .suspend = ata_pci_device_suspend,
+ .suspend = cs5520_pci_device_suspend,
.resume = cs5520_reinit_one,
};
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
