On Sun, 25 Sep 2016, Ondrej Zary wrote: > Merge the PIO and MMIO code (with the help of ioport_map) in g_NCR5380 and > delete g_NCR5380_mmio. > > Signed-off-by: Ondrej Zary <li...@rainbow-software.org> > --- > drivers/scsi/Kconfig | 32 ++--- > drivers/scsi/g_NCR5380.c | 257 > +++++++++++++++++++---------------------- > drivers/scsi/g_NCR5380.h | 33 ++---- > drivers/scsi/g_NCR5380_mmio.c | 10 -- > 4 files changed, 135 insertions(+), 197 deletions(-) > delete mode 100644 drivers/scsi/g_NCR5380_mmio.c > > diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig > index 7d1b431..fd1bca1 100644 > --- a/drivers/scsi/Kconfig > +++ b/drivers/scsi/Kconfig > @@ -780,40 +780,22 @@ config SCSI_ISCI > control unit found in the Intel(R) C600 series chipset. > > config SCSI_GENERIC_NCR5380 > - tristate "Generic NCR5380/53c400 SCSI PIO support" > + tristate "Generic NCR5380/53c400 SCSI" > depends on ISA && SCSI > select SCSI_SPI_ATTRS > ---help--- > - This is a driver for the old NCR 53c80 series of SCSI controllers > - on boards using PIO. Most boards such as the Trantor T130 fit this > - category, along with a large number of ISA 8bit controllers shipped > - for free with SCSI scanners. If you have a PAS16, T128 or DMX3191 > - you should select the specific driver for that card rather than > - generic 5380 support. > + This is a driver for the old NCR 53c80 series of SCSI controllers. > + Most boards such as the Trantor T130 fit this category, along with > + a large number of ISA 8bit controllers shipped for free with SCSI > + scanners. If you have a PAS16, T128 or DMX3191 you should select the > + specific driver for that card rather than generic 5380 support.
The pas16 and t128 drivers were removed (see 4.9/scsi-queue). The DMX3191 isn't an ISA card, so it isn't relevant. > > It is explained in section 3.8 of the SCSI-HOWTO, available from > - <http://www.tldp.org/docs.html#howto>. If it doesn't work out > - of the box, you may have to change some settings in > - <file:drivers/scsi/g_NCR5380.h>. > + <http://www.tldp.org/docs.html#howto>. I didn't find anything useful at that url. Therefore, please change the help text as follows: diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 98e5d51..928d937 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -780,21 +780,14 @@ config SCSI_ISCI control unit found in the Intel(R) C600 series chipset. config SCSI_GENERIC_NCR5380 - tristate "Generic NCR5380/53c400 SCSI PIO support" + tristate "Generic NCR5380/53C400 ISA card SCSI controller support" depends on ISA && SCSI select SCSI_SPI_ATTRS ---help--- - This is a driver for the old NCR 53c80 series of SCSI controllers - on boards using PIO. Most boards such as the Trantor T130 fit this - category, along with a large number of ISA 8bit controllers shipped - for free with SCSI scanners. If you have a PAS16, T128 or DMX3191 - you should select the specific driver for that card rather than - generic 5380 support. - - It is explained in section 3.8 of the SCSI-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. If it doesn't work out - of the box, you may have to change some settings in - <file:drivers/scsi/g_NCR5380.h>. + This is a driver for old ISA card SCSI controllers based on the + NCR 5380, 53C80, 53C400 and 53C400A, and compatible DTC devices. + Most boards such as the Trantor T130 fit this category, along + with various 8-bit and 16-bit ISA cards bundled with SCSI scanners. To compile this driver as a module, choose M here: the module will be called g_NCR5380. The rest of the patch looks good (aside from the missing module alias that Chrisoph mentioned). Thanks. --