The HAPROXY Aloha pocket board is a Load Balancer demo board based on the
Atheros AR9331 SoC with 64Mbytes DDR and 16Mbytes on-board SPI Flash.

Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 arch/mips/ath79/Kconfig             | 12 ++++++
 arch/mips/ath79/Makefile            |  1 +
 arch/mips/ath79/mach-aloha-pocket.c | 86 +++++++++++++++++++++++++++++++++++++
 arch/mips/ath79/machtypes.h         |  1 +
 4 files changed, 100 insertions(+)
 create mode 100644 arch/mips/ath79/mach-aloha-pocket.c

diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index dfc6020..937cede 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -71,6 +71,18 @@ config ATH79_MACH_UBNT_XM
          Say 'Y' here if you want your kernel to support the
          Ubiquiti Networks XM (rev 1.0) board.
 
+config ATH79_MACH_ALOHA_POCKET
+       bool "HAPROXY Aloha Pocket board"
+       select SOC_AR933X
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_SPI
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+         Say 'Y' here if you want your kernel to support the
+         HAPROXY Aloha Pocket board.
+
 endmenu
 
 config SOC_AR71XX
diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile
index fcc382c..a87c4ee 100644
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
 obj-$(CONFIG_ATH79_MACH_DB120)         += mach-db120.o
 obj-$(CONFIG_ATH79_MACH_PB44)          += mach-pb44.o
 obj-$(CONFIG_ATH79_MACH_UBNT_XM)       += mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_ALOHA_POCKET)  += mach-aloha-pocket.o
diff --git a/arch/mips/ath79/mach-aloha-pocket.c 
b/arch/mips/ath79/mach-aloha-pocket.c
new file mode 100644
index 0000000..2beb068
--- /dev/null
+++ b/arch/mips/ath79/mach-aloha-pocket.c
@@ -0,0 +1,86 @@
+/*
+ *  HAPROXY Aloha Pocket board support
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juh...@openwrt.org>
+ *  Copyright (C) 2016 Neil Armstrong <narmstr...@baylibre.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "machtypes.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+#define ALOHA_POCKET_GPIO_LED_WLAN             0
+#define ALOHA_POCKET_GPIO_LED_LAN              13
+
+#define ALOHA_POCKET_GPIO_BTN_RESET            11
+
+#define ALOHA_POCKET_KEYS_POLL_INTERVAL        20      /* msecs */
+#define ALOHA_POCKET_KEYS_DEBOUNCE_INTERVAL    \
+                                       (3 * ALOHA_POCKET_KEYS_POLL_INTERVAL)
+
+#define ALOHA_POCKET_CAL_DATA_ADDR     0x1fff1000
+
+static struct gpio_led aloha_pocket_leds_gpio[] __initdata = {
+       {
+               .name           = "aloha-pocket:red:wlan",
+               .gpio           = ALOHA_POCKET_GPIO_LED_WLAN,
+               .active_low     = 0,
+       },
+       {
+               .name           = "aloha-pocket:green:lan",
+               .gpio           = ALOHA_POCKET_GPIO_LED_LAN,
+               .active_low     = 0,
+               .default_state  = 1,
+       },
+};
+
+static struct gpio_keys_button aloha_pocket_gpio_keys[] __initdata = {
+       {
+               .desc           = "reset button",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = ALOHA_POCKET_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = ALOHA_POCKET_GPIO_BTN_RESET,
+               .active_low     = 0,
+       }
+};
+
+static struct spi_board_info aloha_pocket_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "mx25l1606e",
+       }
+};
+
+static struct ath79_spi_platform_data aloha_pocket_spi_data = {
+       .bus_num        = 0,
+       .num_chipselect = 1,
+};
+
+static void __init aloha_pocket_setup(void)
+{
+       u8 *cal_data = (u8 *) KSEG1ADDR(ALOHA_POCKET_CAL_DATA_ADDR);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(aloha_pocket_leds_gpio),
+                                aloha_pocket_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, ALOHA_POCKET_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(aloha_pocket_gpio_keys),
+                                       aloha_pocket_gpio_keys);
+
+       ath79_register_spi(&aloha_pocket_spi_data, aloha_pocket_spi_info,
+                          ARRAY_SIZE(aloha_pocket_spi_info));
+       ath79_register_usb();
+       ath79_register_wmac(cal_data);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALOHA_POCKET, "ALOHA-Pocket",
+            "HAPROXY ALOHA Pocket board", aloha_pocket_setup);
diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h
index a13db3d..9c63895 100644
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -23,6 +23,7 @@ enum ath79_mach_type {
        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */
        ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
+       ATH79_MACH_ALOHA_POCKET,        /* HAPROXY Aloha Pocket board */
 };
 
 #endif /* _ATH79_MACHTYPE_H */
-- 
1.9.1

Reply via email to