From: Georgi Vlaev <gvl...@juniper.net>
Add binding document for the i2c mux driver of Juniper's I2CS FPGA.
Signed-off-by: Georgi Vlaev <gvl...@juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.anton...@konsulko.com>
---
.../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
new file mode 100644
index 0000000..03d917f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt
@@ -0,0 +1,27 @@
+* Juniper I2C Mux on I2CS
+
+ I2C mux driver for switching the RE access to the FPC i2c bus.
+ Compatible with the FPC variant of the I2CS.
+
+Required properties:
+
+ - compatible: "jnx,i2cs-mux-i2cs".
+
+The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Example:
+
+fpc0_mux {
+ compatible = "jnx,i2c-mux-i2cs";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fpc0i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+};
--
1.9.1
