2007/2/22, Alan <[EMAIL PROTECTED]>:
The following will generate a vast amount of debug of which only the end matters.
For some reason, related to my current distro, i didn't used init=/bin/sh . The full, bloated, log is here http://www.webalice.it/ceztko/log1 (taken from launch of "poweroff"). I can confirm, as Rolf Offermanns noted, that "halt -f" doesn't cut the power. An extract is here. However i'm worried that the log is trunkated. Is netconsole good enough to use in this case? [17179886.052000] ata_scsi_dump_cdb: CDB (1:0,0,0) 2a 00 07 5b dd 90 00 00 08 [17179886.052000] ata_scsi_translate: ENTER [17179886.052000] scsi_10_lba_len: ten-byte command [17179886.052000] ata_sg_setup: ENTER, ata1 [17179886.052000] ata_sg_setup: 1 sg elements mapped [17179886.052000] ata_fill_sg: PRD[0] = (0x2317000, 0x1000) [17179886.052000] ata_dev_select: ENTER, ata1: device 0, wait 1 [17179886.052000] ata_tf_load_pio: feat 0x0 nsect 0x8 lba 0x90 0xDD 0x5B [17179886.052000] ata_tf_load_pio: device 0xE7 [17179886.052000] ata_exec_command_pio: ata1: cmd 0xCA [17179886.052000] ata_scsi_translate: EXIT [17179886.052000] ata_host_intr: ata1: host_stat 0x24 [17179886.052000] ata_host_intr: ata1: protocol 3 (dev_stat 0x50) [17179886.052000] ata_sg_clean: unmapping 1 sg elements [17179886.056000] rc(4351): READ block 309568 on sda6 [17179886.056000] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 07 5f 96 40 00 00 08 [17179886.056000] ata_scsi_translate: ENTER [17179886.056000] scsi_10_lba_len: ten-byte command [17179886.056000] ata_sg_setup: ENTER, ata1 [17179886.056000] ata_sg_setup: 1 sg elements mapped [17179886.056000] ata_fill_sg: PRD[0] = (0x7E992000, 0x1000) [17179886.056000] ata_dev_select: ENTER, ata1: device 0, wait 1 [17179886.056000] ata_tf_load_pio: feat 0x0 nsect 0x8 lba 0x40 0x96 0x5F [17179886.056000] ata_tf_load_pio: device 0xE7 [17179886.056000] ata_exec_command_pio: ata1: cmd 0xC8 [17179886.056000] ata_scsi_translate: EXIT [17179886.064000] ata_host_intr: ata1: host_stat 0x24 [17179886.064000] ata_host_intr: ata1: protocol 3 (dev_stat 0x50) [17179886.064000] ata_sg_clean: unmapping 1 sg elements [17179886.064000] S90halt(4351): READ block 307632 on sda6 [17179886.064000] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 07 5f 8e b0 00 00 08 [17179886.064000] ata_scsi_translate: ENTER [17179886.064000] scsi_10_lba_len: ten-byte command [17179886.064000] ata_sg_setup: ENTER, ata1 [17179886.064000] ata_sg_setup: 1 sg elements mapped [17179886.064000] ata_fill_sg: PRD[0] = (0x7CC47000, 0x1000) [17179886.064000] ata_dev_select: ENTER, ata1: device 0, wait 1 [17179886.064000] ata_tf_load_pio: feat 0x0 nsect 0x8 lba 0xB0 0x8E 0x5F [17179886.064000] ata_tf_load_pio: device 0xE7 [17179886.064000] ata_exec_command_pio: ata1: cmd 0xC8 [17179886.064000] ata_scsi_translate: EXIT [17179886.076000] ata_host_intr: ata1: host_stat 0x24 [17179886.076000] ata_host_intr: ata1: protocol 3 (dev_stat 0x50) [17179886.076000] ata_sg_clean: unmapping 1 sg elements - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/