On Thu, Feb 22, 2007 at 08:05:33AM +0800, Antonino A. Daplas wrote:
> On Fri, 2007-02-09 at 20:34 +0100, Ondrej Zajicek wrote: 
> > This patch adds driver for S3 Trio / S3 Virge. Driver is tested
> > with most versions of S3 Trio and S3 Virge, on i386.
> > It is tested both as compiled-in and module. It is against
> > linux-2.6.20 .
> > 
> > This is version 3. There are some minor modifications from version 2
> > (mostly coding style cleanups).
> 
> Nice, the first driver to use tileblit :-)
> 
> Since this driver is already in the -mm tree, can you resubmit a diff
> against that? 

This driver was removed from -mm tree, because it is in 2.6.21-rc1 .
So it is probably unnnecessary to resubmit a diff, isn't it?

> > +
> > +static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
> > +                           u_int transp, struct fb_info *fb)
> > +{
...
> > +   case 16:
> > +           if (regno >= 16)
> > +                   return -EINVAL;
> 
> Just return success without doing anything. I presume this is
> truecolor.

OK

> > +static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info 
> > *info) {
> > +
> > +   unsigned int offset;
> > +
> > +   /* Validate the offsets */
> > +   if ((var->xoffset + var->xres) > var->xres_virtual)
> > +           return -EINVAL;
> > +   if ((var->yoffset + var->yres) > var->yres_virtual)
> > +           return -EINVAL;
> 
> You need not validate the offsets, fb_pan_display() does this for you.

OK

> > +/* Frame buffer operations */
> > +
> > +static struct fb_ops s3fb_ops = {
> > +   .owner          = THIS_MODULE,
> > +   .fb_open        = s3fb_open,
> > +   .fb_release     = s3fb_release,
> > +   .fb_check_var   = s3fb_check_var,
> > +   .fb_set_par     = s3fb_set_par,
> > +   .fb_setcolreg   = s3fb_setcolreg,
> > +   .fb_blank       = s3fb_blank,
> > +   .fb_pan_display = s3fb_pan_display,
> > +   .fb_fillrect    = s3fb_fillrect,
> > +   .fb_copyarea    = cfb_copyarea,
> 
> No s3fb_copyarea :-). Usually it's the other way around,
> imageblit is unaccelerated.

This driver is unaccelerated (if i don't consider text mode support as
acceleration). s3fb_fillrect and s3fb_imageblit are here because of supported
4bpp modes are not handled by cfb_* functions. cfb_copyarea works for that
modes by coincidence.

-- 
Ondrej 'SanTiago' Zajicek (email: [EMAIL PROTECTED], jabber: [EMAIL PROTECTED])
OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
"To err is human -- to blame it on a computer is even more so."
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to