At the first system bring-up, I chose to use spin-table because ARM
Trusted Firmware was not ready for this platform at that moment.
Actually, these SoCs are equipped with EL3 and able to provide PSCI.
Now I finished porting the ATF BL31 for the UniPhier platform, so it
is ready to migrate to PSCI enable method.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 13 ++++++++-----
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 19 ++++++++++---------
2 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index da3cdd8..73e0acf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -43,7 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */
+/memreserve/ 0x80000000 0x00080000;
/ {
compatible = "socionext,uniphier-ld11";
@@ -70,19 +70,22 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x000>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x001>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
};
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
clocks {
refclk: ref {
compatible = "fixed-clock";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index efb47ea..6f48e82 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -43,7 +43,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */
+/memreserve/ 0x80000000 0x00080000;
/ {
compatible = "socionext,uniphier-ld20";
@@ -79,35 +79,36 @@
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
- enable-method = "spin-table";
- cpu-release-addr = <0 0x80000000>;
+ enable-method = "psci";
};
};
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
clocks {
refclk: ref {
compatible = "fixed-clock";
--
1.9.1
