On Fri, Oct 14, 2016 at 02:57:21PM +0530, Jagan Teki wrote:
> From: Jagan Teki <[email protected]>
>
> Add usbhost support for Engicam i.CoreM6 dql modules.
>
> Cc: Sascha Hauer <[email protected]>
> Cc: Fabio Estevam <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Matteo Lisi <[email protected]>
> Cc: Michael Trimarchi <[email protected]>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
> Changes for v7:
> - none
> Changes for v6:
> - none
> Changes for v5:
> - none
> Changes for v4:
> - new patch
>
> arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> index f424cd5..ffec879 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
> @@ -56,6 +56,15 @@
> regulator-boot-on;
> regulator-always-on;
> };
> +
> + reg_usb_h1_vbus: usb_h1_vbus {
Hyphen instead of underscore should be used in node name. Also please
name fixed regulator in the following schema:
reg_xxx: regulator-xxx {
...
};
Shawn
> + compatible = "regulator-fixed";
> + regulator-name = "usb_h1_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> };
>
> &can1 {
> @@ -109,6 +118,12 @@
> status = "okay";
> };
>
> +&usbh1 {
> + vbus-supply = <®_usb_h1_vbus>;
> + disable-over-current;
> + status = "okay";
> +};
> +
> &usdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> --
> 2.7.4
>
