We used to use a fixed rate clock for the UARTs. Now that we have clock support we can associate the correct clocks to the UARTs and drop the 26MHz fixed rate UART clock.
Signed-off-by: Erin Lo <erin...@mediatek.com> --- arch/arm/boot/dts/mt2701.dtsi | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index c9a8dbf..7eab6f4 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -73,12 +73,6 @@ #clock-cells = <0>; }; - uart_clk: dummy26m { - compatible = "fixed-clock"; - clock-frequency = <26000000>; - #clock-cells = <0>; - }; - clk26m: oscillator@0 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -186,7 +180,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -195,7 +190,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -204,7 +200,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -213,7 +210,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; }; -- 1.9.1