On Mon, Sep 19, 2016 at 10:41:51AM +0530, Sanchayan Maity wrote: > Remove the use of DDC I2C bus bitbang to support reading of EDID > and rely on support from internal HDMI I2C master controller instead. > As a result remove the device tree property ddc-i2c-bus. > > Signed-off-by: Sanchayan Maity <maitysancha...@gmail.com>
I think that the dw-hdmi i2c support [1] is a prerequisite of this patch. I do not see it lands on v4.9-rc1. Or am I missing something? Shawn [1] https://patchwork.kernel.org/patch/9296883/ > --- > Changes since v1: > > Change the ranking in i2c aliases > > v1: https://lkml.org/lkml/2016/9/14/55 > --- > arch/arm/boot/dts/imx6q-apalis-ixora.dts | 12 +++--------- > arch/arm/boot/dts/imx6qdl-apalis.dtsi | 25 +++++++++---------------- > 2 files changed, 12 insertions(+), 25 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts > b/arch/arm/boot/dts/imx6q-apalis-ixora.dts > index 207b85b..82b81e0 100644 > --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts > +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts > @@ -55,10 +55,9 @@ > "fsl,imx6q"; > > aliases { > - i2c0 = &i2cddc; > - i2c1 = &i2c1; > - i2c2 = &i2c2; > - i2c3 = &i2c3; > + i2c0 = &i2c1; > + i2c1 = &i2c2; > + i2c2 = &i2c3; > }; > > aliases { > @@ -186,11 +185,6 @@ > }; > > &hdmi { > - ddc-i2c-bus = <&i2cddc>; > - status = "okay"; > -}; > - > -&i2cddc { > status = "okay"; > }; > > diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi > b/arch/arm/boot/dts/imx6qdl-apalis.dtsi > index 99e323b..8c67dd8 100644 > --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi > @@ -53,18 +53,6 @@ > status = "disabled"; > }; > > - /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */ > - i2cddc: i2c@0 { > - compatible = "i2c-gpio"; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_i2c_ddc>; > - gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */ > - &gpio2 30 GPIO_ACTIVE_HIGH /* scl */ > - >; > - i2c-gpio,delay-us = <2>; /* ~100 kHz */ > - status = "disabled"; > - }; > - > reg_1p8v: regulator-1p8v { > compatible = "regulator-fixed"; > regulator-name = "1P8V"; > @@ -209,6 +197,12 @@ > }; > }; > > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hdmi_ddc>; > + status = "disabled"; > +}; > + > /* > * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier > * board) > @@ -633,11 +627,10 @@ > >; > }; > > - pinctrl_i2c_ddc: gpioi2cddcgrp { > + pinctrl_hdmi_ddc: hdmiddcgrp { > fsl,pins = < > - /* DDC bitbang */ > - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 > - MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 > + MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1 > >; > }; > > -- > 2.9.3 >
