From: Axel Haslam <ahas...@baylibre.com>
This patch documents the device tree bindings required for
the ohci controller found in TI da8xx family of SoC's
Signed-off-by: Axel Haslam <ahas...@baylibre.com>
---
.../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt
diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
new file mode 100644
index 0000000..4251c84
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
@@ -0,0 +1,39 @@
+DA8XX USB OHCI controller
+
+Required properties:
+
+ - compatible: Should be "ti,da830-ohci"
+ - reg: Should contain one register range i.e. start and length
+ - interrupts: Description of the interrupt line
+ - phys: Phandle for the PHY device
+ - phy-names: Should be "usb-phy"
+
+Optional properties:
+ - vbus-supply: Regulator that controls vbus power
+
+Example for omap138-lck:
+
+vbus_fixed: fixed-regulator-vbus {
+ compatible = "regulator-fixed";
+ gpio = <&gpio 109 0>;
+ oc-gpio = <&gpio 36 0>;
+ regulator-boot-on;
+ enable-active-high;
+ regulator-name = "vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <1>;
+ status = "disabled";
+};
+usb: usb@0225000 {
+ compatible = "ti,da830-ohci";
+ reg = <0x225000 0x1000>;
+ interrupts = <59>;
+ phys = <&usb_phy 1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+};
--
1.9.1
