For the USB3.0 controller, USB 2.0 reset not driven while
port is in Resume state. So, do not program the USB 2.0 reset
(PORTSC[PR]=1) while in Resume state.
Signed-off-by: Rajat Srivastava <rajat.srivast...@nxp.com>
Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bha...@nxp.com>
---
Changes in v2:
- Remove the quirk and make it generic to xhci.
- Edit the title and comment
drivers/usb/host/xhci-hub.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 730b9fd..a27dbb4 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -878,7 +878,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16
wValue,
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
int max_ports;
unsigned long flags;
- u32 temp, status;
+ u32 temp, status, tmp_status = 0;
int retval = 0;
__le32 __iomem **port_array;
int slot_id;
@@ -1098,6 +1098,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq,
u16 wValue,
spin_lock_irqsave(&xhci->lock, flags);
break;
case USB_PORT_FEAT_RESET:
+ /*
+ * Do not drive a reset signal when the port
+ * is resuming
+ */
+ tmp_status = readl(port_array[wIndex]);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!DEV_SUPERSPEED(tmp_status) &&
+ (tmp_status & PORT_PLS_MASK) == XDEV_RESUME) {
+ xhci_err(xhci, "skip port reset\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ retval = -EPERM;
+ break;
+ }
+ spin_lock_irqsave(&xhci->lock, flags);
+
temp = (temp | PORT_RESET);
writel(temp, port_array[wIndex]);
--
2.1.0
