On Mon, 17 Oct 2016, Jianhong Chen wrote:
> DEV_OFF and DEV_OFF_RST functions for RK808 are designed error that
> only DEV_OFF_RST can power off supplies. RK818 has been fixed this
> issue, so that DEV_OFF is used to power off supplies.
>
> Signed-off-by: Jianhong Chen <che...@rock-chips.com>
> ---
> drivers/mfd/rk808.c | 23 ++++++++++++++++++++++-
> include/linux/mfd/rk808.h | 1 +
> 2 files changed, 23 insertions(+), 1 deletion(-)
Applied, thanks.
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 0f8acc5..2c9acdb 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -290,6 +290,24 @@ static void rk808_device_shutdown(void)
> dev_err(&rk808_i2c_client->dev, "power off error!\n");
> }
>
> +static void rk818_device_shutdown(void)
> +{
> + int ret;
> + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> +
> + if (!rk808) {
> + dev_warn(&rk808_i2c_client->dev,
> + "have no rk818, so do nothing here\n");
> + return;
> + }
> +
> + ret = regmap_update_bits(rk808->regmap,
> + RK818_DEVCTRL_REG,
> + DEV_OFF, DEV_OFF);
> + if (ret)
> + dev_err(&rk808_i2c_client->dev, "power off error!\n");
> +}
> +
> static const struct of_device_id rk808_of_match[] = {
> { .compatible = "rockchip,rk808" },
> { .compatible = "rockchip,rk818" },
> @@ -304,6 +322,7 @@ static int rk808_probe(struct i2c_client *client,
> struct rk808 *rk808;
> const struct rk808_reg_data *pre_init_reg;
> const struct mfd_cell *cells;
> + void (*pm_pwroff_fn)(void);
> int nr_pre_init_regs;
> int nr_cells;
> int pm_off = 0;
> @@ -331,6 +350,7 @@ static int rk808_probe(struct i2c_client *client,
> nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
> cells = rk808s;
> nr_cells = ARRAY_SIZE(rk808s);
> + pm_pwroff_fn = rk808_device_shutdown;
> break;
> case RK818_ID:
> rk808->regmap_cfg = &rk818_regmap_config;
> @@ -339,6 +359,7 @@ static int rk808_probe(struct i2c_client *client,
> nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
> cells = rk818s;
> nr_cells = ARRAY_SIZE(rk818s);
> + pm_pwroff_fn = rk818_device_shutdown;
> break;
> default:
> dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
> @@ -393,7 +414,7 @@ static int rk808_probe(struct i2c_client *client,
> "rockchip,system-power-controller");
> if (pm_off && !pm_power_off) {
> rk808_i2c_client = client;
> - pm_power_off = rk808_device_shutdown;
> + pm_power_off = pm_pwroff_fn;
> }
>
> return 0;
> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
> index 6d435a3..83701ef 100644
> --- a/include/linux/mfd/rk808.h
> +++ b/include/linux/mfd/rk808.h
> @@ -290,6 +290,7 @@ enum rk818_reg {
> #define SWITCH2_EN BIT(6)
> #define SWITCH1_EN BIT(5)
> #define DEV_OFF_RST BIT(3)
> +#define DEV_OFF BIT(0)
>
> #define VB_LO_ACT BIT(4)
> #define VB_LO_SEL_3500MV (7 << 0)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
